Urban heat island | EPFL Graph Search

An urban heat island (UHI) is an urban area that is significantly warmer than its surrounding rural areas due to human activities. The temperature difference is usually larger at night than during the day, and is most apparent when winds are weak. UHI is most noticeable during the summer and winter. The main cause of the UHI effect is from the modification of land surfaces. A study has shown that heat islands can be affected by proximity to different types of land cover, so that proximity to barren land causes urban land to become hotter and proximity to vegetation makes it cooler. Waste heat generated by energy usage is a secondary contributor. As a population center grows, it tends to expand its area and increase its average temperature. The term heat island is also used; the term can be used to refer to any area that is relatively hotter than the surrounding, but generally refers to human-disturbed areas. Monthly rainfall is greater downwind of cities, partially due to the UHI. I

An urban ecohydrological model to quantify the effect of vegetation on urban climate and hydrology (UT&C v1.0)

Paolo Burlando, Matthias Roth

Increasing urbanization is likely to intensify the urban heat island effect, decrease outdoor thermal comfort, and enhance runoff generation in cities. Urban green spaces are often proposed as a mitigation strategy to counteract these adverse effects, and many recent developments of urban climate models focus on the inclusion of green and blue infrastructure to inform urban planning. However, many models still lack the ability to account for different plant types and oversimplify the interactions between the built environment, vegetation, and hydrology. In this study, we present an urban ecohydrological model, Urban Tethys-Chloris (UT&C), that combines principles of ecosystem modelling with an urban canopy scheme accounting for the biophysical and ecophysiological characteristics of roof vegetation, ground vegetation, and urban trees. UT&C is a fully coupled energy and water balance model that calculates 2 m air temperature, 2 m humidity, and surface temperatures based on the infinite urban canyon approach. It further calculates the urban hydrological fluxes in the absence of snow, including transpiration as a function of plant photosynthesis. Hence, UT&C accounts for the effects of different plant types on the urban climate and hydrology, as well as the effects of the urban environment on plant well-being and performance. UT&C performs well when compared against energy flux measurements of eddy-covariance towers located in three cities in different climates (Singapore, Melbourne, and Phoenix). A sensitivity analysis, performed as a proof of concept for the city of Singapore, shows a mean decrease in 2 m air temperature of 1.1 ∘C for fully grass-covered ground, 0.2 ∘C for high values of leaf area index (LAI), and 0.3 ∘C for high values of Vc,max (an expression of photosynthetic capacity). These reductions in temperature were combined with a simultaneous increase in relative humidity by 6.5 %, 2.1 %, and 1.6 %, for fully grass-covered ground, high values of LAI, and high values of Vc,max, respectively. Furthermore, the increase of pervious vegetated ground is able to significantly reduce surface runoff.

2020

Improvement of an urban turbulence parametrization for meteorological operational forecast and air quality modeling

Clive Muller

During the last century, urban pollution has increased with the growth of cities. Urban air quality has become a high priority as it is directly linked to concerns such as human exposure and health. The present work is dedicated to urban air quality modeling with focus on urban meteorology. The main goal is to improve meteorological and air quality simulations in urban areas. Based on measurements and numerical air quality simulations, Chapter 3 describes the meteorological situation and tests an emission inventory for an ozone pollution episode in Mexico City (2 March 1997), in order to determine the principal factors to be accounted in an air quality study. The Mexico City case shows the great influence of meteorological conditions and pollutant emissions on air quality. A thorough understanding of the phenomena governing the meteorological conditions, like small scale convergence, and an accurate emission inventory validated by VOC measurements in the city, are sensitive elements in an air quality study. In Chapter 4, the presence of an Urban Heat Island (UHI) is underlined over the city of Basel (Switzerland) with the BUBBLE measurements. Further on, the ability of aLMo (the operational weather prediction model of MeteoSwiss) to reproduce the effect of a city on the boundary layer atmospheric flow fields is investigated. Results show that aLMo is not able to reproduce the UHI and hence that its surface scheme based on the Monin-Obukhov Similarity Theory (MOST) is not adapted for the urban areas. Therefore, the Buildings Effects Parametrization (BEP) which has been developed by Martilli et al.(2002) especially for urban areas, is implemented in aLMo. Results show that alMo is now able to reproduce the main behavior of the urban boundary layer as the UHI and BEP has hence a real enhancement potential for aLMo. Chapter 5 shows the sensitivity of aLMo with respect to its vertical resolution. In order to limit the sensitivity of aLMo to the grid resolution, BEP is modified. The mesoscale model furnishes the upper boundary conditions for the inner calculation of BEP. That is, BEP recalculates independently the vertical profiles of wind, temperature and energy based on the surface fluxes of momentum, heat and turbulent kinetic energy. The results obtained show a decrease in the sensitivity to the resolution and a better agreement with the measurements. Furthermore, the modified version of BEP gives additional meteorological fields (temperature, wind and TKE) in the urban canopy. The computed temperature in the urban canopy shows a good agreement with measurements in a Basel street canyon. This work shows that it is not necessary to have a high resolution for taking into account modification of the atmospheric flow fields induced by a city.

EPFL2007