Concept
Radio receiver design
Related publications (38)
A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection
This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...
Piscataway2024Transversal Spurious Mode Suppression in Ultra-Large-Coupling SH0 Acoustic Resonators on YX36 degrees-Cut Lithium Niobate
Luis Guillermo Villanueva Torrijo, Silvan Stettler
This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large e16 piezoelectric coefficient of YX36 degrees.-cut LNO, fabricated ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023Power-Optimized Digitally Controlled Oscillator in 28-nm CMOS for Low-Power FMCW Radars
Christian Enz, Francesco Chicco, Franz Xaver Pengg, Sammy Cerida Rengifo
This work presents the design of a 24-GHz digitally controlled oscillator (DCO) in an advanced 28-nm bulk CMOS technology for short-range frequency-modulated continuous-wave radar system-on-chip for mobile and Internet-of-Things devices. The power minimiza ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021A Maximum-Likelihood-based Multi-User LoRa Receiver Implemented in GNU Radio
Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Orion Afisiadis, Joachim Tobias Tapparel, Mathieu Pierre Xhonneux
LoRa is a popular low-power wide-area network (LPWAN) technology that uses spread-spectrum to achieve long-range connectivity and resilience to noise and interference. For energy efficiency reasons, LoRa adopts a pure ALOHA access scheme, which leads to re ...
IEEE2020Analysis, modeling and design of a CMOS Super-Regenerative Receiver for implanted medical devices under square and sinusoidal quench signals
Catherine Dehollain, Naci Pekçokgüler
Medical implant devices have found widespread application in recent years. The Super-Regenerative Receiver has been one preferred architecture due to its power advantage over other architectures. We present a detailed analysis of the circuits and their equ ...
ELSEVIER SCIENCE BV2019Polymer-Based Additive Manufacturing of High-Performance Waveguide and Antenna Components
Jean-Philippe Ansermet, Emile Jacques de Rijk, Tomislav Debogovic, Mathieu Billod
In this paper, a lightweight horn antenna array demonstrator is designed and fabricated by means of an additive manufacturing (AM) process that has been optimized for complicated passive radio-frequency (RF) components. The presented design comprises a com ...
Ieee-Inst Electrical Electronics Engineers Inc2017Modulation, Coding, and Receiver Design for Gigabit mmWave Communication
While wireless communication has become an ubiquitous part of our daily life and the world around us, it has not been able yet to deliver the multi-gigabit throughput required for applications like high-definition video transmission or cellular backhaul co ...
EPFL2016Utilisation des communautés d’oligochètes pour l’évaluation de la qualité biologique et du fonctionnement des cours d’eau : un bilan à partir de données genevoises (Suisse)
Use of oligochaete communities for the assessment of the biological quality and the functioning of watercourses : a review of data from the Geneva area (Switzerland). – Oligochaetes are used in some cantons in Switzerland to assess the biological quality o ...
2015Baseband and RF hardware impairments in full-duplex wireless systems: experimental characterisation and suppression
Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Andrew Charles Mallory Austin, Pavle Belanovic
Hardware imperfections can significantly reduce the performance of full-duplex wireless systems by introducing non-idealities and random effects that make it challenging to fully suppress self-interference. Previous research has mostly focused on analysing ...
Hindawi Publishing Corporation2015A 2.4-GHz low power polar transmitter for wireless body area network applications
Christian Enz, Vladimir Kopta, Franz Xaver Pengg
A 2.4 GHz low power polar transmitter is proposed in this paper. A dynamic biasing circuit, controlled by a digital envelope signal, is used as a direct digital-to-RF envelope converter. It effectively linearizes the input-output characteristic of the over ...
Springer Verlag2014