Concept
Tension (physics)
Related people (31)
Thomas Keller
EDUCATION
1992 Dr. sc. techn. (PhD)
Swiss Federal Institute of Technology, Zurich (ETH)
1983 Dipl. Bauing. ETH (MS civil engineering)
Swiss Federal Institute of Technology, Zurich (ETH)
EMPLOYMENT
2007-present, Full Professor of Structural Engineering (100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Civil Engineering Institute
1998-2007, Associate Professor of Structural Engineering (80/100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Structural Engineering Institute
Foundation of CCLab in 2000
1996-1998, Assistant Professor of Structural Engineering (50%)
Swiss Federal Institute of Technology, Zurich (ETH)
Department of Architecture
1992-2004, Senior Project Engineer and Joint Owner
Engineering offices in Zug and Zurich
1990-1992, Research Scientist
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
1986-1990, Project Engineer
Architecture and engineering office Calatrava, Zurich
1983-1986, Teaching and Research Assistant
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
John Richard Thome
John R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
Anastasios Vassilopoulos
PERSONAL INFORMATION Name : Anastasios P. Vassilopoulos email : anastasios.vassilopoulos@epfl.ch Tel: 41 21 6936393 Fax: 41 21 6936240 SUMMARY OF QUALIFICATIONS 1995: Dipl. Mechanical Engineer, University of Patras, Greece 2001: Dr Mechanical Engineer, Doctoral thesis in fatigue of composite materials from the Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece CURRENT POSITION Senior Scientist (MER), Composite Construction Laboaratory (CCLab), EPFL PREVIOUS POSITIONS 2006-2012 Research and Teaching Associate, Composite Construction Laboaratory (CCLab), EPFL 2002-2006 Assisstant Professor, Technological Educational Institute (TEI) of Patras, Greece 2001-2003 Post-doctoral Research associate, (Part-time) Dept. Mechanical Engineering and Aeronautics of the University of Patras, Greece. EDUCATION 1990 - 1995 Graduate student, Dept. Mechanical Engineering and Aeronautics, University of Patras, Greece October 1994-January 1995 Dept. Mechanical Engineering, University of Bristol, U.K. (In the frame of Erasmus project for the final year thesis, under the supervision of Prof. R. D. Adams) 1995 - 2000 Research assistant, Dept. Mechanical Engineering and Aeronautics, University of Patras. LANGUAGES English, Greek, French COMMUNITY ACTIVITIES (Member of) Council of the European Society of Composite Materials (ESCM) Council of the European Society of Experimental Mechanics (EuraSEM) The European Structural Integrity Society (ESIS) The European Energy Research Alliance (EERA, JP WIND) The Technical Chamber of Greece (TCG) The Hellenic Association of Mechanical & Electrical Engineers SCIENTIFIC-RESEARCH INTERESTS Experimental methods for the study of the behavior of composite materials under static and fatigue loading Development of analytical methods for the study of the behavior of FRP composite materials under variable amplitude complex stress states Development of fatigue life prediction methodologies for composite materials and structures Design of constructions with composite materials
Yves Weinand
Biography
Architect and civil engineer, Prof. Dr. Yves Weinand is one of the most recognised researchers in the field of contemporary wood construction. Founder of the Bureau d'Etude Weinand, he has, since 1996, designed and worked on many emblematic wooden buildings, such as the Saint Loup Chapel, the new Vaudois Parliament or, more recently, the Timber Pavilion of Vidy in Lausanne. His fundamental research questions the technical and static possibilities of wooden materials. The interdisciplinary exploration carried out at the EPFL's Laboratory for Timber Constructions (Ibois), of which he is director, concerns wood in all its aspects, from round wood to manufactured wood. The recent research carried out at Ibois on free structures with wood-wood connections (without screw nor glue) has been the subject of several technological transfers, and stands as tangible proof of new possibilities for wood construction. Yves Weinand is currently working on a large-scale project for a hall for the head office of a joinery in Luxembourg, consisting of a succession of arches with spans of 22.5 to 53.7m, entirely assembled in wood ). Through new innovative approaches, the ambition of his research is to develop a new generation of renewable and ecological wooden construction.He is regularly invited to present his work at international symposia on timber construction.
Fields of expertise Architectural designTimber structuresDigital FabricationRobotic AssemblyStructural Wood mechanicsIntegrally Attached Timber plate structures
Distinctions 2012 Grand Prix d'Architecture de Wallonie 2014 Best Paper Award, Advances in Architectural Geometry conference. (IBOIS team) 2017 Medal for Research and Technique by the Academy of Architecture. 2018 Mention Régionale, Prix Lignum for the Timber Pavilion of Vidy-Lausanne 2019 "Disctinction Bois 2019" for the Nouveau Parlement vaudois.2019 Grand Prix d'Architecture de Wallonie____________________________________________________________________________ Selected publications Les Cahiers de l'Ibois/ Ibois Notebooks 1, F. Fromonot, S. Berthier, Y. Rocher, publication directors: Y. Weinand et C. Catsaros, 2020 EPFL Press Le Pavillon en bois du Théâtre de Vidy, under the direction of Yves Weinand; V. Baudriller, J. Gamerro, M. Jaccard, C. Robeller; 2017, PPURAdvanced Timber Structures - Architectural Designs and Digital Dimensioning, Y. Weinand, 2017, Birkhaüser, publié en trois langues (french : Structures Innovantes en Bois (2016); german : Neue Holztragwerke - Architektonische Entwürfe und digitale Bemessung (2017)Grubenmann Project / Projekt Grubenmann, Y. Weinand, 2016, Stiftung Grubenmann-SammlungTimber Project: Nouvelles formes d’architectures en bois, Y. Weinand, 2010, PPURArchitexto, Y. Weinand and D. Darcis, 2009, Editions Fourre-Tout, LiègeLe bois soudé, B. Stamm and Y. Weinand, 2004, Architecture Bois & DépendanceNew Modeling - projeter ensemble, Y. Weinand, 2003, PPUR
Fields of expertise Architectural designTimber structuresDigital FabricationRobotic AssemblyStructural Wood mechanicsIntegrally Attached Timber plate structures
Distinctions 2012 Grand Prix d'Architecture de Wallonie 2014 Best Paper Award, Advances in Architectural Geometry conference. (IBOIS team) 2017 Medal for Research and Technique by the Academy of Architecture. 2018 Mention Régionale, Prix Lignum for the Timber Pavilion of Vidy-Lausanne 2019 "Disctinction Bois 2019" for the Nouveau Parlement vaudois.2019 Grand Prix d'Architecture de Wallonie____________________________________________________________________________ Selected publications Les Cahiers de l'Ibois/ Ibois Notebooks 1, F. Fromonot, S. Berthier, Y. Rocher, publication directors: Y. Weinand et C. Catsaros, 2020 EPFL Press Le Pavillon en bois du Théâtre de Vidy, under the direction of Yves Weinand; V. Baudriller, J. Gamerro, M. Jaccard, C. Robeller; 2017, PPURAdvanced Timber Structures - Architectural Designs and Digital Dimensioning, Y. Weinand, 2017, Birkhaüser, publié en trois langues (french : Structures Innovantes en Bois (2016); german : Neue Holztragwerke - Architektonische Entwürfe und digitale Bemessung (2017)Grubenmann Project / Projekt Grubenmann, Y. Weinand, 2016, Stiftung Grubenmann-SammlungTimber Project: Nouvelles formes d’architectures en bois, Y. Weinand, 2010, PPURArchitexto, Y. Weinand and D. Darcis, 2009, Editions Fourre-Tout, LiègeLe bois soudé, B. Stamm and Y. Weinand, 2004, Architecture Bois & DépendanceNew Modeling - projeter ensemble, Y. Weinand, 2003, PPUR
Andreas Mortensen
Andreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Katrin Beyer
Since 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Yves Leterrier
Yves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Aurelio Muttoni
Aurelio Muttoni is full Professor and Head of the Structural Concrete Laboratory at the Ecole Polytechnique Fédérale de Lausanne (Switzerland). He received his diploma and PhD in civil engineering from the Swiss Federal Institute of Technology, Zurich, Switzerland, in 1982 and 1989, respectively.
His current teaching activities focus on the conceptual design of structures, theory and dimensioning of concrete structures as well as bridge design. His research group is active in the following domains: behaviour and design methods for structural concrete, conceptual design of innovative structures, shear in structural concrete, punching shear of slabs, nonlinear structural analysis including its reliability, bond between steel and concrete, aggregate interlocking, fatigue and influence of sustained loading on the concrete strength, mechanical behaviour and design concepts for ultra-high performance concrete, textile concrete and recycled concrete.
Aurelio Muttoni was the recipient of the Chester Paul Siess Award for Excellence in Structural Research in 2010 and the co-recipient of the Wason Medal for Most Meritorious Paper in 2014 of the American Concrete Institute. He is a member of the Presidium of fib (International Federation for Structural Concrete), several fib commissions and task groups and has been Project Team Leader for the second generation of EN 1992-1-1 (Eurocode for structural concrete).
Aurelio Muttoni is also cofounder and partner of the Muttoni & Fernández consulting office (www.mfic.ch). This office is active in the conceptual design, analysis and dimensioning of load-bearing structure in architecture and civil engineering constructions as well as consulting activities in the field of structural engineering.
Jean-Jacques Meister
A Swiss citizen, Jean-Jacques Meister was born in 1950. He received a diploma in electrical engineering, then a diploma in physics from the Swiss Federal Institute of Technology in Lausanne (EPFL). He joined the Institute of Biomedical Engineering at the Swiss Federal Institute of Technology in Zurich and obtained a PhD in1983. From 1984 to 1990, he worked in different areas of biophysics and biomedical engineering. His main contributions concern novel noninvasive methods for the prevention and diagnosis of cardiovascular diseases: mechanical properties of the arterial wall, arterial hemodynamics, and Doppler ultrasonography. In 1990, he was recruited as a full professor of experimental physics at the Swiss Federal Institute of Technology in Lausanne. He was director of the laboratory of biomedical engineering until 2001, then director of the laboratory of cell biophysics. His fields of research are cellular biophysics: cytoskeleton dynamics, motility & adhesion of cells and calcium dynamics in smooth muscle cells. He spent a sabbatical leave in 2000 at the famous Marine Biological Laboratory, Woods Hole, Massachusetts -USA to improve his skills in molecular and cellular biology. His teaching activities include courses in general physics, Newtonian mechanics, biomedical engineering and biophysics presented to undergraduate and graduate EPFL students in physics and engineering. He is author or co-author of more than 230 scientific papers & book chapters and 8 international patents.
Pierre Gönczy
Pierre Gönczy obtained his PhD from The Rockefeller University (New York, USA) in 1995 and joined the laboratory of Tony Hyman at the EMBL (Heidelberg, Germany) as a postdoctoral fellow in 1996. He started his own laboratory at ISREC in 2000. In 2005, he became Associate Professor at the EPFL School of Life Sciences, and was promoted Full Professor in 2009.