Power-to-gas (often abbreviated P2G) is a technology that uses electric power to produce a gaseous fuel. When using surplus power from wind generation, the concept is sometimes called windgas.
Most P2G systems use electrolysis to produce hydrogen. The hydrogen can be used directly, or further steps (known as two-stage P2G systems) may convert the hydrogen into syngas, methane, or LPG.
Single-stage P2G systems to produce methane also exist, such as reversible solid oxide cell (rSOC) technology.
The gas may be used as chemical feedstock, or converted back into electricity using conventional generators such as gas turbines. Power-to-gas allows energy from electricity to be stored and transported in the form of compressed gas, often using existing infrastructure for long-term transport and storage of natural gas. P2G is often considered the most promising technology for seasonal renewable energy storage.
Power-to-gas systems may be deployed as adjuncts to wind parks or solar power plants. The excess power or off-peak power generated by wind generators or solar arrays may then be used hours, days, or months later to produce electrical power for the electrical grid. In the case of Germany, before switching to natural gas, the gas networks were operated using towngas, which for 50–60 % consisted of hydrogen. The storage capacity of the German natural gas network is more than 200,000 GWh which is enough for several months of energy requirement. By comparison, the capacity of all German pumped-storage hydroelectricity plants amounts to only about 40 GWh.
Natural gas storage is a mature industry that has been in existence since Victorian times. The storage/retrieval power rate requirement in Germany is estimated at 16 GW in 2023, 80 GW in 2033 and 130 GW in 2050. The storage costs per kilowatt hour are estimated at €0.10 for hydrogen and €0.15 for methane.
The existing natural gas transport infrastructure conveys massive amounts of gas for long distances profitably using pipelines. It is now profitable to ship natural gas between continents using LNG carriers.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
This course examines the supply of energy from various angles: available resources, how they can be combined or substituted, their private and social costs, whether they can meet the demand, and how t
This course aims at understanding classical and non-classical nucleation theory, at reviewing different techniques for the synthesis of nanomaterials (mainly nanoparticles and thin films) and at learn
Covers the operating principles and efficiency of fuel cells and their applications.
Focuses on a case study of a Power to Gas plant, including simulation, measurements, reconciliation, and validation processes.
Explores CO2 electrolyzers, focusing on catalysts, selectivity, and the role of copper.
This is a timeline of the history of hydrogen technology. c. 1520 – First recorded observation of hydrogen by Paracelsus through dissolution of metals (iron, zinc, and tin) in sulfuric acid. 1625 – First description of hydrogen by Johann Baptista van Helmont. First to use the word "gas". 1650 – Turquet de Mayerne obtained a gas or "inflammable air" by the action of dilute sulphuric acid on iron. 1662 – Boyle's law (gas law relating pressure and volume) 1670 – Robert Boyle produced hydrogen by reacting metals with acid.
A solid oxide electrolyzer cell (SOEC) is a solid oxide fuel cell that runs in regenerative mode to achieve the electrolysis of water (and/or carbon dioxide) by using a solid oxide, or ceramic, electrolyte to produce hydrogen gas (and/or carbon monoxide) and oxygen. The production of pure hydrogen is compelling because it is a clean fuel that can be stored, making it a potential alternative to batteries, methane, and other energy sources (see hydrogen economy).
An energy transition (or energy system transformation) is a significant structural change in an energy system regarding supply and consumption. Currently, a transition to sustainable energy (mostly renewable energy) is underway to limit climate change. It is also called renewable energy transition. The current transition is driven by a recognition that global greenhouse-gas emissions must be drastically reduced. This process involves phasing-down fossil fuels and re-developing whole systems to operate on low carbon electricity.
For the sustainable development of the renewable hydrogen sector, alkaline electrolysis appears to be a technology of choice. Nevertheless, despite its long history that showed its reliability in the industrial field and despite the traditional belief from ...
Cell Press2024
The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...
EPFL2024
, , , , ,
Tremendous efforts have been made in developing highly selective catalysts for electrochemical CO 2 conversion to formate. However, the rapid deactivation resulting from structural reconstruction and phase transition poses considerable challenges to the sy ...