Publications related to Printing

Rapid inkjet printing of high catalytic activity Co3O4 /N-rGO layers for oxygen reduction reaction

Hubert Girault, Emad Oveisi, Andreas Stephan Lesch, Véronique Amstutz, Victor Costa Bassetto

The accurate and reproducible large-scale production of catalyst layers containing low-cost, abundant electrocatalysts gains in importance. Herein, pivotal factors are discussed that need to be considered when a combined inkjet printing and photonic curing ...

2018

Printing materials and technologies in the 15th−17th century book production: an undervalued research field

Giovanni Colavizza, Fauzia Albertin

We present a systematic non-invasive investigation of a large corpus of early printed books, exploiting multiple techniques. This work is part of a broader project -- Argeia -- aiming to study early printing technologies, their evolution and, potentially, ...

Elsevier2018

3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures

Matthias Lütolf, Andrea Negro, Thibaud Cherbuin

Inkjet printing is widely considered a promising strategy to pattern hydrogels and living cells into three-dimensional (3D) constructs that structurally resemble tissues in our body. However, this approach is currently constrained by the limited control ov ...

NATURE PUBLISHING GROUP2018

Nanocrystalline ZnO Obtained by the Thermal Decomposition of [Zn(H2O)(O2C5H7)(2)] in 1-Butanol: Synthesis and Testing as a Sensing Material

Thomas Maeder

The influence of conditions of heat treatment of a solution [Zn(H2O)(O2C5H7)(2)] in 1-butanol (temperature 125-185 degrees C, treatment times 2, 4, and 6 h) on dispersion and microstructure of the formed nanocrystalline and poorly aggregated zinc oxide, pr ...

MAIK NAUKA/INTERPERIODICA/SPRINGER2018

Hierarchical porous structure

Dominique Pioletti, Pierre-Etienne Bourban, Matteo Gregorio Modesto Marascio

Cellular thermoplastic structures with hierarchical multi-scale porosity (preferably 1-300 µm micro-porosity to 0.3-10 mm macro-porosity) are produced from an integrated approach of 3D printing, preferably by Fused Deposition Modeling (FDM), and of supercr ...

2018

Printing sub-micron structures using Talbot mask-aligner lithography with a 193 nm CW laser light source

Toralf Scharf, Wilfried Noell, Raoul Kirner, Andreas Vetter

A continuous improvement of resolution in mask-aligner lithography is sought after to meet the requirements of an ever decreasing minimum feature size in back-end processes. For periodic structures, utilizing the Talbot effect for lithography has emerged a ...

2018

High-cycle electromechanical aging of dielectric elastomer actuators with carbon-based electrodes

Herbert Shea, Samuel Rosset, Samuel Schlatter, Christine Anne de Saint-Aubin

We present high-cycle aging tests of Dielectric Elastomer Actuators (DEAs) based on silicone elastomers, reporting on the time-evolution of actuation strain and of electrode resistance over millions of cycles. We compare several types of carbon-based elect ...

Institute of Physics2017

Unified rule based correction for corners in proximity lithography mask using high resolution features

Hans Peter Herzig, Toralf Scharf, Krishnaparvathy Puthankovilakam

Printing industry and printing techniques are increasing its market value by new methodologies. The resolution and accuracy of the pattern transfer is always a challenge for the industry, especially for the proximity printing industries which use mask alig ...

Elsevier2017

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Printing

Conductive silicone elastomers electrodes processable by screen printing

Rapid inkjet printing of high catalytic activity Co3O4 /N-rGO layers for oxygen reduction reaction

Printing materials and technologies in the 15th−17th century book production: an undervalued research field

Print-Light-Synthesis of Platinum Nanostructured Indium-Tin-Oxide Electrodes for Energy Research

3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures

Nanocrystalline ZnO Obtained by the Thermal Decomposition of [Zn(H2O)(O2C5H7)(2)] in 1-Butanol: Synthesis and Testing as a Sensing Material

Hierarchical porous structure

Printing sub-micron structures using Talbot mask-aligner lithography with a 193 nm CW laser light source

High-cycle electromechanical aging of dielectric elastomer actuators with carbon-based electrodes

Unified rule based correction for corners in proximity lithography mask using high resolution features

Graph Chatbot

Chat with Graph Search

Printing materials and technologies in the 15th−17th century book production: an undervalued research field

Nanocrystalline ZnO Obtained by the Thermal Decomposition of [Zn(H2O)(O2C5H7)(2)] in 1-Butanol: Synthesis and Testing as a Sensing Material

Conductive silicone elastomers electrodes processable by screen printing

3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures

Hierarchical porous structure

Printing sub-micron structures using Talbot mask-aligner lithography with a 193 nm CW laser light source

Rapid inkjet printing of high catalytic activity Co3O4 /N-rGO layers for oxygen reduction reaction

Print-Light-Synthesis of Platinum Nanostructured Indium-Tin-Oxide Electrodes for Energy Research

High-cycle electromechanical aging of dielectric elastomer actuators with carbon-based electrodes

Unified rule based correction for corners in proximity lithography mask using high resolution features