Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Martensitic Ni-Ti was observed to transform to the austenitic phase due to defects introduced either by ion or electron irradiations at a temperature where the martensitic phase is normally stable. The phenomenon was studied by molecular dynamics simulatio ...
The microstructure of titanium alloys (Ti–1Al–1Mn, Ti–6Al–4V) nitrided under glow discharge was characterised using light microscopy, X-ray diffraction and analytical electron microscopy. The investigations revealed a complex multilayered microstructure pr ...
Molecular dynamics simulations of displacement cascades in aluminium, aluminium-nickel solid solutions and inhomogeneous samples containing amorphous or crystalline Al3Ni precipitates are performed. It is shown that no segregation occurs inside the displac ...
Neutron-irradiation-induced embrittlement of a 2.25Cr1Mo steel is investigated by means of small punch testing along with scanning electron trucroscopy. There is an apparent irradiation-induced embrittlement effect after the steel is irradiated at about 40 ...
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...
Mechanisms responsible for the embrittlement of leaded "free-machining" copper alloys at intermediate temperatures (i.e. around 400 °C) are examined using a combination of microstructural and mechanical characterization. Tensile tests are conducted on pure ...
Microstructure and chemical composition of the hard Ni–P–Ti layer formed on the Ti–6Al–4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high resolution transmissio ...
Within the European Union, the two major breeding blanket concepts presently being developed are the helium cooled pebble bed (HCPB), and the helium cooled lithium lead (HCLL) blankets. For both concepts, different conceptual designs are being discussed wi ...
Thick-film materials are very advantageous for piezoresistive pressure and force sensors because of ease of processing, reliability and low cost. However, their applications are restricted because standard thick-film materials require processing temperatur ...
A new technique is proposed for the direct measurement of capillary forces in systems of relevance to the infiltration processing of metal matrix composites. Capable of handling melt temperatures up to 1500 K and infiltration pressures up to 20 MPa, the te ...
