Wind direction | EPFL Graph Search

Wind direction is generally reported by the direction from which the wind originates. For example, a north or northerly wind blows from the north to the south; the exceptions are onshore winds (blowing onto the shore from the water) and offshore winds (blowing off the shore to the water). Wind direction is usually reported in cardinal (or compass) direction, or in degrees. Consequently, a wind blowing from the north has a wind direction referred to as 0° (360°); a wind blowing from the east has a wind direction referred to as 90°, etc. Weather forecasts typically give the direction of the wind along with its speed, for example a "northerly wind at 15 km/h" is a wind blowing from the north at a speed of 15 km/h. If wind gusts are present, their speed may also be reported. A variety of instruments can be used to measure wind direction, such as the anemoscope, windsock, and wind vane. All these instruments work by moving to minimize air resistance. The way a weather vane is pointed by prevailing winds indicates the direction from which the wind is blowing. The larger opening of a windsock faces the direction that the wind is blowing from; its tail, with the smaller opening, points in the same direction as the wind is blowing. Modern instruments used to measure wind speed and direction are called anemoscopes, anemometers and wind vanes. These types of instruments are used by the wind energy industry, both for wind resource assessment and turbine control. When a high measurement frequency is needed (such as in research applications), wind can be measured by the propagation speed of ultrasound signals or by the effect of ventilation on the resistance of a heated wire. Another type of anemometer uses pitot tubes that take advantage of the pressure differential between an inner tube and an outer tube that is exposed to the wind to determine the dynamic pressure, which is then used to compute the wind speed. In situations where modern instruments are not available, an index finger can be used to test the direction of wind.

Radar processing techniques to study summer snowfall in the Sør Rondane Mountains, Antarctica

Alfonso Ferrone

Snowfall is one of the main positive contributors to the surface mass balance of the Antarctic ice sheet. There are several techniques to monitor solid precipitation on the continent. Among them, meteorological radars provide the means to characterize the phenomenon on a local scale, with an unparalleled view of the processes in the lower levels of the atmosphere. However, due to the harsh weather and the logistic difficulties associated with their deployment in Antarctica, their usage is often limited to the immediate surroundings of the few scientific bases scattered on the continent.In this thesis, meteorological radar observations are used to investigate the effect of complex orography on precipitation in the vicinity of the Belgian research base Princess Elisabeth Antarctica (PEA). Two algorithms for the processing and calibration of the radar measurements collected had to be developed and evaluated. One of them has been applied to the data from three K-band Doppler profilers (MRR-PRO), deployed in a transect across the Sør Rondane Mountains, south of PEA. These datasets have been used together with atmospheric model simulations, reanalysis, and complementary observations to examine the role of sublimation and other local phenomena on precipitation at the three sites. The possible connections with the synoptic conditions on a larger scale have also been investigated.The first part of the thesis is devoted to the development of two algorithms. First, we introduce a differential reflectivity calibration method for dual-polarization weather radars with vertical scanning capability. Even though the technique functions with solid and liquid precipitation, it is particularly suited for radars deployed in polar regions with no access to rainfall. The offset derived from each vertical scan undergoes an Ordinary Kriging interpolation, which determines the temporal variability of the calibration. A processing algorithm for the MRR-PRO measurements has also been developed. The method improves the sensitivity of the radar products and the consistency of the Doppler velocity field. At the same time, it addresses some artifacts in the data caused by interference and noise within the instrument.The second part of the thesis revolves around the analysis of the datasets collected at PEA. The MRR-PRO measurements are used to investigate the presence of virga and surface precipitation at the three sites. Moreover, a series of high-resolution simulations reveal similarities in the wind speed and relative humidity profiles in the lower troposphere. The varying depth of a dry layer in the lowest levels causes differences in sublimation across the transect. Additionally, analysis of the wind direction indicates that orographic lifting enhances precipitation near the mountain peaks. Finally, our observations, consistent with previous studies, suggest that virga and surface precipitation represent different stages of the same large-scale precipitation systems.Altogether, this thesis proposes a series of tools for studying snowfall through radar observations. Moreover, the analysis of the interaction between orography and precipitation at PEA covers locations that have not yet been the subject of scientific studies. It demonstrates the existence of a significant degree of variability on relatively small scales, highlighting the effect of complex terrain and its interaction with the local and large-scale circulation on snowfall in the region.

EPFL2022

Radar processing techniques to study summer snowfall in the Sør Rondane Mountains, Antarctica

Alfonso Ferrone

EPFL2022