Electronic switch

In electronics, an electronic switch is a switch controlled by an active electronic component or device. Without using moving parts, they are called solid state switches, which distinguishes them from mechanical switches. Electronic switches are considered binary devices because they dramatically change the conductivity of a path in electrical circuit between two extremes when switching between their two states of on and off. Many people use metonymy to call a variety of devices that conceptually connect or disconnect signals and communication paths between electrical devices as "switches", analogous to the way mechanical switches connect and disconnect paths for electrons to flow between two conductors. The traditional relay is an electromechanical switch that uses an electromagnet controlled by a current to operate a mechanical switching mechanism. Other operating principles are also used (for instance, solid-state relays invented in 1971 control power circuits with no moving parts, instead using a semiconductor device to perform switching—often a silicon-controlled rectifier or triac). Early telephone systems used an electromagnetically operated Strowger switch to connect telephone callers; later telephone exchanges contain one or more electromechanical crossbar switches. Thus the term 'switched' is applied to telecommunications networks, and signifies a network that is circuit switched, providing dedicated circuits for communication between end nodes, such as the public switched telephone network. The term switch has since spread to a variety of digital active devices such as transistors and logic gates whose function is to change their output state between logic states or connect different signal lines. The common feature of all these usages is they refer to devices that control a binary state of either on or off, closed or open, connected or not connected, conducting or not conducting, low impedance or high impedance. The diode can be treated as switch that conducts significantly only when forward biased and is otherwise effectively disconnected (high impedance).

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (10)

Related lectures (3)

Digital signal

A digital signal is a signal that represents data as a sequence of discrete values; at any given time it can only take on, at most, one of a finite number of values. This contrasts with an analog signal, which represents continuous values; at any given time it represents a real number within a continuous range of values. Simple digital signals represent information in discrete bands of analog levels. All levels within a band of values represent the same information state.

Switch

In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. The most common type of switch is an electromechanical device consisting of one or more sets of movable electrical contacts connected to external circuits. When a pair of contacts is touching current can pass between them, while when the contacts are separated no current can flow.

Electronic switch

Implementation with Transistors CS-119(c): Information, Computation, Communication

Covers the implementation of a processor with transistors and focuses on improving performance through various technologies and circuit designs.

Computer Architecture: Electronic Calculations with Transistors CS-119(d): Information, Computation, Communication

Covers electronic calculations with transistors, logical circuits, and processor capabilities.

Internet Capsules: Security and Privacy

Covers internet security, privacy, TLS, blocking, filtering, surveillance, and espionage.