A mainspring is a spiral torsion spring of metal ribbon—commonly spring steel—used as a power source in mechanical watches, some clocks, and other clockwork mechanisms. Winding the timepiece, by turning a knob or key, stores energy in the mainspring by twisting the spiral tighter. The force of the mainspring then turns the clock's wheels as it unwinds, until the next winding is needed. The adjectives wind-up and spring-powered refer to mechanisms powered by mainsprings, which also include kitchen timers, metronomes, music boxes, wind-up toys and clockwork radios.
A modern watch mainspring is a long strip of hardened and blued steel, or specialised steel alloy, 20–30 cm long and 0.05-0.2 mm thick. The mainspring in the common 1-day movement is calculated to enable the watch to run for 36 to 40 hours, i.e. 24 hours between daily windings with a power-reserve of 12 to 16 hours, in case the owner is late winding the watch. This is the normal standard for hand-wound as well as self-winding watches. 8-Day movements, used in clocks meant to be wound weekly, provide power for at least 192 hours but use longer mainsprings and bigger barrels. Clock mainsprings are similar to watch springs, only larger.
Since 1945, carbon steel alloys have been increasingly superseded by newer special alloys (iron, nickel and chromium with the addition of cobalt, molybdenum, or beryllium), and also by cold-rolled alloys ('structural hardening'). Known to watchmakers as 'white metal' springs (as opposed to blued carbon steel), these are stainless and have a higher elastic limit. They are less subject to permanent bending (becoming 'tired') and there is scarcely any risk of their breaking. Some of them are also practically non-magnetic.
In their relaxed form, mainsprings are made in three distinct shapes:
Spiral coiled: These are coiled in the same direction throughout, in a simple spiral.
Semi-reverse: The outer end of the spring is coiled in the reverse direction for less than one turn (less than 360°).
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ce cours introduit les bases de la mécanique des structures : calcul des contraintes et déformations provoquées par les forces extérieures et calcul des déformations. Ces enseignements théoriques sont
A balance wheel, or balance, is the timekeeping device used in mechanical watches and small clocks, analogous to the pendulum in a pendulum clock. It is a weighted wheel that rotates back and forth, being returned toward its center position by a spiral torsion spring, known as the balance spring or hairspring. It is driven by the escapement, which transforms the rotating motion of the watch gear train into impulses delivered to the balance wheel.
A spring is a device consisting of an elastic but largely rigid material (typically metal) bent or molded into a form (especially a coil) that can return into shape after being compressed or extended. Springs can store energy when compressed. In everyday use the term often refers to coil springs, but there are many different spring designs. Modern springs are typically manufactured from spring steel. An example of a non-metallic spring is the bow, made traditionally of flexible yew wood, which when drawn stores energy to propel an arrow.
A pocket watch (or pocketwatch) is a watch that is made to be carried in a pocket, as opposed to a wristwatch, which is strapped to the wrist. They were the most common type of watch from their development in the 16th century until wristwatches became popular after World War I during which a transitional design, trench watches, were used by the military. Pocket watches generally have an attached chain to allow them to be secured to a waistcoat, lapel, or belt loop, and to prevent them from being dropped.
Explores the Egg Drop Challenge Contest, where student teams design innovative egg protection devices for a drop competition.
Explores static balancing in mechanisms, emphasizing conservation of total potential energy and practical examples like the corkscrew and Anglepoise lamp.
Covers the integration and sizing of metal springs in microtechnology.
The unique mechanical and electrical properties of graphene make it an exciting material for nanoelectromechanical systems (NEMS). NEMS resonators with graphene springs facilitate studies of graphene's fundamental material characteristics and thus enable i ...
Series elastic actuators (SEAs) and variable elastic actuators (VSAs) provide shock resistance, energy storage, and stable force control. However, they usually require extra springs, mechanical parts, and transmissions, increasing size, weight, number of m ...
WILEY2022
, , , , ,
Ultrasensitive nanomechanical instruments, e.g. atomic force microscopy (AFM), can be used to perform delicate biomechanical measurements and reveal the complex mechanical environment of biological processes. However, these instruments are limited because ...