Publications by Vincenzo D'Auria

AC loss and electrical resistance of the RW3 diffusion-bonded joint

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

The DEMO magnet system - Status and future challenges

Pierluigi Bruzzone, Rainer Wesche, Kamil Sedlák, Davide Uglietti, Federica Demattè, Roberto Guarino, Mithlesh Kumar, Vincenzo D'Auria, Ortensia Dicuonzo, Chiara Frittitta

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PRO ...

2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Pierluigi Bruzzone, Mithlesh Kumar, Vincenzo D'Auria

Future high-field accelerator magnets foresee the extensive use of Nb3Sn, more expensive than the Nb-Ti of LHC. For projects involving the series production of magnets, conductor grading is mandatory in order to reduce the cost. To allow grading ...

IEEE Institute of Electrical and Electronics Engineers2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...

IEEE Institute of Electrical and Electronics Engineers2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...

2021

Advance in the conceptual design of the European DEMO magnet system

Pierluigi Bruzzone, Davide Uglietti, Kamil Sedlák, Boris Stepanov, Rainer Wesche, Roberto Guarino, Mithlesh Kumar, Vincenzo D'Auria, Ortensia Dicuonzo, Chiara Frittitta

The European DEMO, i.e. the demonstration fusion power plant designed in the framework of the Roadmap to Fusion Electricity by the EUROfusion Consortium, is approaching the end of the pre-conceptual design phase, to be accomplished with a Gate Review in 20 ...

2020

Inter-Layer Joint of Nb3Sn React&Wind Cables for Fusion Magnets

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Vincenzo D'Auria

The Swiss Plasma Center (SPC) has developed a layout of Toroidal Field (TF) coil for EUROfusion DEMO tokamak, based on the reference tokamak baseline of 2015. Each TF coil winding pack is wound with graded Nb3Sn conductors and consists of 12 single layers, ...

IEEE Institute of Electrical and Electronics Engineers2020

FCC-hh: The Hadron Collider: Future Circular Collider Conceptual Design Report Volume 3

Pierluigi Bruzzone, Jan Steggemann, Jean-Michel Sallese, Elena Graverini, Tatiana Pieloni, Mikhail Chapochnikov, Luca Rossi, Javier Barranco Garcia, Claudia Tambasco, Fabio Avino

In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider ...

2019