Surface segregation in high-entropy alloys from alchemical machine learning

About
Privacy
Disclaimer

Graph Chatbot

Related publications (30)

Theory-guided development of homogeneous catalysts for the reduction of CO2 to formate, formaldehyde, and methanol derivatives

Matthew Wodrich, Anne-Clémence Corminboeuf, Shubhajit Das, Hanna Hinrika Cramer

The stepwise catalytic reduction of carbon dioxide (CO2) to formic acid, formaldehyde, and methanol opens non-fossil pathways to important platform chemicals. The present article aims at identifying molecular control parameters to steer the selectivity to ...

2023

The science of soft robot design: A review of motivations, methods and enabling technologies

Josephine Anna Eleanor Hughes, Francesco Stella

Novel technologies, fabrication methods, controllers and computational methods are rapidly advancing the capabilities of soft robotics. This is creating the need for design techniques and methodologies that are suited for the multi-disciplinary nature of s ...

FRONTIERS MEDIA SA2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Analysis of accretion disc structure and stability using open code for vertical structure

Pascale Jablonka

Detailed chemical abundances of very metal-poor (VMP; [Fe/H] < -2) stars are important for better understanding the first stars, early star formation, and chemical enrichment of galaxies. Big on-going and coming high-resolution spectroscopic surveys provid ...

OXFORD UNIV PRESS2023

Hybridization driving distortions and multiferroicity in rare-earth nickelates

Nicola Marzari, Iurii Timrov, Michele Kotiuga, Luca Binci

For decades transition-metal oxides have generated a huge interest due to the multitude of physical phenomena they exhibit. In this class of materials, the rare-earth nickelates, RNiO3, stand out for their rich phase diagram stemming from complex couplings ...

Amer Physical Soc2023

Layered metals as polarized transparent conductors

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo, Maja Deborah Bachmann

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conducti ...

Nature Portfolio2023

Improving time-resolution and sensitivity of in situ X-ray photoelectron spectroscopy of a powder catalyst by modulated excitation

Oliver Kröcher, Davide Ferri, Filippo Buttignol

Ambient pressure X-ray photoelectron spectroscopy (APXPS) is a powerful tool to characterize the surface structure of heterogeneous catalysts in situ. In order to improve the time resolution and the signal-to-noise (S/N) ratio of photoemission spectra, we ...

ROYAL SOC CHEMISTRY2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Annapaola Parrilli, Caroline Hain, Alberto Ortona, Manoj Kondibhau Naikade

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Thermal Design of a Medium Voltage Modular Multilevel Converter Cell

Drazen Dujic, Yanick Patrick Frei

This paper presents the cooling concept for a medium voltage modular multilevel converter cell. To optimize power density, the metallic enclosure is used to dissipate the heat generated by semiconductor losses, while maintaining maximum temperatures below ...

New York2023

Page 3 of 3