Surface microfabricated SU-8 devices with integrated electrodes for scanning probe microscopy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We report on the fabrication of atomic force microscopy (AFM) probes using a novel technology that performs every machining step by means of one single deep reactive ion etching (DRIE) equipment. Specific etching conditions are optimized in order to define ...
We report on the fabrication of atomic force microscopy (AFM) probes using a novel technology that performs every machining step by means of one single deep reactive ion etching (DRIE) equipment. Specific etching conditions are optimized in order to define ...
We report on the fabrication of atomic force microscopy (AFM) probes using a novel technology that performs every machining step by means of one single deep reactive ion etching (DRIE) equipment. Specific etching conditions are optimized in order to define ...
Single crystals of layered semiconductors such as WS2 and MoS2 have already proven their efficiency as active elements in photovoltaic cells. Due to their high optical absorption coefficient in the visible range, these materials could be used in the form o ...
We report here a new method to release functional SU-8 micro-cantilevers with embedded metal electrodes from the surface, based on isotropic SF6 dry etching of a poly-silicon sacrificial layer. This new fast and clean release technique allows a reproducibl ...
This paper presents dramatic improvements in the micro-fabrication of three-dimensional microfluidic channels and high-aspect ratio tunnels within the bulk of a fused silica substrate. We also report the fabrication of optical waveguides within the same su ...
A two-dimensional (2-D) array (4 by 8) of single-photon avalanche diodes integrated in an industrial complementary metal-oxide-semiconductor (CMOS) process is presented. Each pixel combines a photodiode biased above its breakdown voltage in the so-called G ...
The inexpensive fabrication of high-quality probes for nearfield optical applications is still unsolved although several methods for integrated fabrication have been proposed in the past. A further drawback is the intensity loss of the transmitted light in ...
This thesis deals with the development of microfabrication technologies based on photoplastic structuring by lithographic and molding techniques. These technologies, combined with an original releasing method, allow for the simple fabrication of pseudo thr ...
The four-point probe is used for the measurement of the resistivity of thin metal or semiconductor films. There is an interest in miniaturization of the probes to obtain higher surface sensitivity, an increased spatial resolution and less damage to the sam ...