DUV/MEMS based stencils for full-wafer scale, resistless, patterning of mesoscopic structures
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We report on the fabrication and testing of a chip-scale plasma light source. The device consists of a stack of three anodically bonded Pyrex wafers, which hermetically enclose a gas-filled cavity in which electrodes are used to ignite a low power (≪500 mW ...
We demonstrate the nanofabrication of the transmission SU-8 gratings with periods from 200 nm (5000 lines/mm) to 1 lm (1000 lines/mm) with different trench depths for applications from near-infrared to deep-UV wavelength. The imprint property of SU-8 under ...
We report on the fabrication and testing of a chip-scale plasma light source. The device consists of a stack of three anodically bonded Pyrex wafers, which hermetically enclose a gas-filled cavity in which electrodes are used to ignite a low power (≪500 mW ...
Abstract: A simple and fast process to fabricate micro-electro-mechanical (MEM) resonators with deep sub-micron transduction gaps in thin SOI is presented. The proposed process is realized on both 350 nm and 1.5 μm thin silicon-on-insulator (SOI) substrate ...
The process comprises the step of deposition of a sensor and of a part or of the entirety of a treatment unit on a not necessarily planar conductive surface by a soft lithography technique. ...
Stencil-assisted oxygen reactive ion etching is a low-cost and parallel process for the replication of micrometric and nanometric patterns in any organic material. This lithography process allows the patterning of organic material non sensitive to electron ...
We present two kinds of novel nanoimprint lithography techniques based on SU-8 photoresist with single layer and tri-layer approaches. The imprint templates with high aspect ratio were first fabricated by electron beam lithography (EBL) and reactive ion et ...
We present the fabrication of 150 nm half-pitch Si grating templates by reactive ion etch (RIE), which are used in nanoimprint lithography (NIL) for high groove density gratings in SU-8 plastic. The etch properties such as the etch rate, profile and etchin ...
A simple and fast process for micro-electromechanical (MEM) resonators with deep sub-micron transduction gaps in thin SOI is presented in this paper. Thin SOI wafers are important for advanced CMOS technology and thus are evaluated as resonator substrates ...
Ion beam LIGA allows the etching of 3D nano-structures by direct writing with a nano-sized beam. However, this is a relatively time consuming process. We propose here another approach for etching structures on large surfaces and faster, compared to the dir ...
