Adhesively bonded lap joints from pultruded GFRP profiles. Part II: joint strength prediction
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Arch-shaped members are widely used for construction of tunnels, bridges, silos and shells. These members are not typically provided with transverse reinforcement and may thus have a brittle behaviour at failure. When subjected to bending or shear, traditi ...
Thin-ply composites are rapidly gaining interest in the composite industry, not only because of the larger design possibilities that they offer, but also because of positive size effects that have been shown to improve performance in various loading condit ...
We have performed a series of co-compression experiments on Au, Pt, Mo, MgO and NaCl to extend internally consistent pressure calibration and characterize shear strength of pressure media to 2.5 Mbar. Measured unit cell volumes of calibrants show differenc ...
Rocks in underground projects at great depth, which are under high static stresses, may be subjected to dynamic disturbance at the same time. In our previous work (Li et al. Int J Rock Mech Min Sci 45(5):739–748, 2008), the dynamic compressive behaviour of ...
A new martensitic ODS alloy (nominal composition Fe-9Cr-1W-0.2Ti-0.3Y 2O3) has recently been developed at CEA Saclay to achieve the goals defined for GEN IV reactors. The aim of this paper is to present the main challenges involved in the manufacturing of ...
Compression experiments were conducted on slender glass fiber-reinforced polymer (GFRP) laminates at different temperatures in the elevated range. Experimental buckling loads, lateral second-order deformations, and shear strength decreased with increasing ...
Flat slabs are commonly used in buildings due to their easiness of construction and economy. In order to keep these advantages, columns are usually not continuous through the slabs in multi-storey buildings. In these cases, the slabs are subjected to large ...
The present work investigates the saturation damage state of a two-layer coating on a substrate (layer 1/layer 2/substrate) under uniaxial tensile loading in order to derive expressions for the interfacial strength between layer 1 and layer 2, and between ...
The purpose of this review is to discuss the development and the state of the art in dynamic testing techniques and dynamic mechanical behaviour of rock materials. The review begins by briefly introducing the history of rock dynamics and explaining the sig ...
Fabrication of wood-to-wood connections by means of friction welding is an relatively new process holding high potential for development. To connect wooden pieces by means of friction welding, they are initially pressed against each other. The rapid moveme ...
Elsevier Science, Reg Sales Off, Customer Support Dept, 655 Ave Of The Americas, New York, Ny 10010 Usa2011
