Grain boundary diffusion, segregation and wetting in the analysis of intergranular penetration
Related publications (47)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
We report on the fabrication and electrical characterization of functionalized solid-state nanopores in low stress silicon nitride membranes. First, a pore of approximately 50 nm diameter was drilled using a focused ion beam technique, followed by the loca ...
In order to understand the texture formation mechanism in thin films grown under oblique angle deposition (OAD), TiAlN films were deposited at room temperature (RT) under various incident angles. We show that both in-plane and out-of-plane crystallographic ...
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
In a recent contribution, we have reported that dendrites in the aluminum-zinc binary system can change their growth direction continuously from {100} to {110} as the concentration of zinc CZn increases from 5 to 90 wt pct.[1] This was interpreted as an in ...
Nanostructure ZnO hollow microspheres with average crystallite size of about 15 nm, and average diameters of about 1 mu m, were successfully fabricated through a novel hydrothermal method. Hollow microspheres were formed due to self-assembly of ZnO oblong ...
Isothermal NaCl sintering experiments are conducted between 500 and 790 degrees C on powders 75, 100, 150 and 400 mu m in average diameter. Along with literature data, the results are compared with theoretical predictions for the initial stage of sintering ...
A model Ni-Bi system has been used to investigate intergranular penetration (IGP) phenomenon. All experiments have been done on Ni 26° bicrystal at 700°C using bismuth vapour condensation as a source of liquid bismuth. Such a procedure results at room ...
The consequences of the contact between liquid bismuth and a copper bicrystal are investigated at 500°C. Atoms of bismuth are shown to penetrate and embritlle the copper grain boundary. Grain boundary concentration profiles of bismuth are obtained on fract ...