Grain boundary diffusion, segregation and wetting in the analysis of intergranular penetration
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
In a recent contribution, we have reported that dendrites in the aluminum-zinc binary system can change their growth direction continuously from {100} to {110} as the concentration of zinc CZn increases from 5 to 90 wt pct.[1] This was interpreted as an in ...
In order to understand the texture formation mechanism in thin films grown under oblique angle deposition (OAD), TiAlN films were deposited at room temperature (RT) under various incident angles. We show that both in-plane and out-of-plane crystallographic ...
We report on the fabrication and electrical characterization of functionalized solid-state nanopores in low stress silicon nitride membranes. First, a pore of approximately 50 nm diameter was drilled using a focused ion beam technique, followed by the loca ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
A model Ni-Bi system has been used to investigate intergranular penetration (IGP) phenomenon. All experiments have been done on Ni 26° bicrystal at 700°C using bismuth vapour condensation as a source of liquid bismuth. Such a procedure results at room ...
Isothermal NaCl sintering experiments are conducted between 500 and 790 degrees C on powders 75, 100, 150 and 400 mu m in average diameter. Along with literature data, the results are compared with theoretical predictions for the initial stage of sintering ...
The consequences of the contact between liquid bismuth and a copper bicrystal are investigated at 500°C. Atoms of bismuth are shown to penetrate and embritlle the copper grain boundary. Grain boundary concentration profiles of bismuth are obtained on fract ...
Nanostructure ZnO hollow microspheres with average crystallite size of about 15 nm, and average diameters of about 1 mu m, were successfully fabricated through a novel hydrothermal method. Hollow microspheres were formed due to self-assembly of ZnO oblong ...
