Comportement structural des bétons de fibres ultra performants en traction dans des éléments composés
Related publications (197)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The paper presents a study on the tensile behavior of UHPC conducted at the structural concrete laboratory at the Swiss Federal Institute of Technology in Lausanne (EPFL). Material tests and tests on structural members with reinforcement bars have been per ...
International Symposium on Ultra High Performance Concrete2004
Advanced Cementitious Materials such as HPFRCC are well adapted for durable repair and strengthening of concrete structures. Experimental and numerical investigations have been conducted to study the behavior of hybrid structural elements consisting of HPF ...
In anticipation of the introduction of high modulus materials in the Swiss standards, a research project has been carried out for the evaluation of these bituminous mixtures. Three full-size test sections were built in a test hall for ALT named Halle-fosse ...
The reinforcement potential of pulp fibres is presently not fully explored in thermoplastic composites. One of the reasons is that currently used processing methods comprise several severe thermomechanical steps inducing premature degradation of the fibres ...
In many casting processes, some stages, such as the starting phase in the direct chill casting of aluminium alloys, are particularly critical because of the propensity of some alloys to develop either hot tears which initiate at non zero liquid fraction, o ...
Pre-stress bonded composite patch is a promising technique to reinforce steel member damaged by fatigue. ifhe effectiveness of this technique was verified by fatigue tests on notched steel plates. Results showed that the application of carbon fibre reinfor ...
The dimensional stability of V-shaped composite parts made from polyamide-12/carbon fibre (PA12/CF) commingled yarn has been studied. An anisotropic, thermoviscoelastic material model was implemented in a finite element solver to predict the internal stres ...
The mechanical properties of continuous fibre reinforced metals (CFRMs) are known to be very sensitive to the selection and composition of the metallic matrix; for aluminium based CFRMs, commercial alloys are not suitable for this purpose. In the present s ...
The results of the investigation on durability of vegetable fibre-mortar composites subjected to three different environmental conditions; immersed in water, exposed to the open air weathering and controlled cycles of wetting and drying are presented in th ...
Hot tear is one of the most serious defect which a casting can suffer. It represents a major limitation to the production of foundry cast parts and to the productivity of continuous casting processes such as the direct chiil casting of aluminium alloys. As ...