Rapid deposition of hydrogenated microcrystalline silicon by a high current DC discharge
Related publications (98)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Intergranular penetration of liquid bismuth has been analysed in two pure metals, Cu at 500°C and Ni at 700°C, used either as polycrystals or as oriented bicrystals. At the liquid/solid interface, large grooves have developed in Cu-Bi, while micrometer-thi ...
Two series of titania-based photocatalysts were prepared by the sputtering method, in pure Ar atmosphere at a pressure of 0.5 Pa using a vanadium target source in a direct dc mode with a discharge of 300 V. The time of deposition was varied between 1 and 1 ...
Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) have been used to study the microstructural changes and phase development that take place during the hydration of cubic (pure) and orthorhombic (Na-doped) tricalcium aluminate ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
The synthesis of horizontal porous anodic alumina (PAA) structures with individually addressable channel systems is demonstrated. This was achieved by developing a multicontact design of aluminum finger structures (two to Five contacts) on silicon wafers. ...
We performed particle size and particle size distribution measurements for L-cysteine-stabilized ZnS/Mn nanoparticles in the size region below 10 nm. For this we applied transmission electron microscopy (TEM), analytical ultracentrifugation (AUC), dynamic ...
Computational and experimental demonstration of dendritic crystal growth direction and the morphologic diversity of the resulting dendritic structures are discussed. The primary dendrite growth directions can vary continuously between different crystallogr ...
We report on the fabrication and characterization of high performance nanowire superconducting single photon detectors (SSPD) on MgO substrates. The deposition of the superconducting material (NbN) has been performed by magnetron sputtering at 400C. This d ...
Silicon nanowires have been grown with gallium as catalyst by plasma enhanced chemical vapor deposition. The morphology and crystalline structure has been studied by electron microscopy and Raman spectroscopy as a function of growth temperature and catalys ...
In this work the effect of mixing on a sol-gel process is quantitatively investigated. Titanium dioxide synthesis from titanium tetra-isopropoxide is used as a test reaction. Solutions of titanium alkoxide in isopropyl alcohol and water in isopropyl alcoho ...