Analytical transmission electron microscopy and electron diffraction for characterization of multiphase Ni-P-Ti surface layer on Ti-6Al-4V alloy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
In this paper, the fabrication and use of stencils for full-wafer scale shadow mask (stencil) lithography is described. The stencils fabricated via microelectromechanical systems are mechanically stabilized and show clearly reduced stress-induced membrane ...
• Goal The goal of the project was to produce biomolecular fingerprints in order to describe the structure of microbial community which develops during aerobic sludge granulation, initiated in sequencing batch wastewater treatment processes. Four SBR were ...
Much interest has been generated in the fabrication of colloidal crystals from suspensions because of the promise of photonic band gap applications. However, since the case of small, nonsedimenting colloidal particles indeed remains rather rarely treated, ...
The microstructure of titanium alloys (Ti–1Al–1Mn, Ti–6Al–4V) nitrided under glow discharge was characterised using light microscopy, X-ray diffraction and analytical electron microscopy. The investigations revealed a complex multilayered microstructure pr ...
Microstructure and chemical composition of the hard Ni–P–Ti layer formed on the Ti–6Al–4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high resolution transmissio ...
