Analytical transmission electron microscopy and electron diffraction for characterization of multiphase Ni-P-Ti surface layer on Ti-6Al-4V alloy
Publications associées (198)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
Microstructure and chemical composition of the hard Ni–P–Ti layer formed on the Ti–6Al–4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high resolution transmissio ...
• Goal The goal of the project was to produce biomolecular fingerprints in order to describe the structure of microbial community which develops during aerobic sludge granulation, initiated in sequencing batch wastewater treatment processes. Four SBR were ...
The microstructure of titanium alloys (Ti–1Al–1Mn, Ti–6Al–4V) nitrided under glow discharge was characterised using light microscopy, X-ray diffraction and analytical electron microscopy. The investigations revealed a complex multilayered microstructure pr ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
Much interest has been generated in the fabrication of colloidal crystals from suspensions because of the promise of photonic band gap applications. However, since the case of small, nonsedimenting colloidal particles indeed remains rather rarely treated, ...
In this paper, the fabrication and use of stencils for full-wafer scale shadow mask (stencil) lithography is described. The stencils fabricated via microelectromechanical systems are mechanically stabilized and show clearly reduced stress-induced membrane ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...