Intermediate temperature grain boundary phenomena in copper alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS) reduced activation ferritic (RAF) steel was fabricated by mechanical alloying of a pre-alloyed, gas atomised powder with yttria nano-particles, followed by hot isostatic pressing and ther ...
Soare and Curtin (Acta Mater. 2008; 56:4091-4101, 4046-4061) have recently developed a model of dynamic strain aging in solute-strengthened alloys. Their constitutive law describes time-dependent solute strengthening using rate equations that can be calibr ...
Ternary Au-Cu-Pt alloys, of unequal gold and copper atomic contents and containing 2.5 wt.% Pt, are ordered isothermally at 250 or 400 degrees C after annealing at 650 degrees C and quenching in water. The alloys are characterized by transmission electron ...
The microstructural evolution of deformed 304L stainless steel during static recrystallization and grain growth was characterized by EBSD within an SEM chamber, which enabled microstructural and crystallographic information to be determined. The experiment ...
The paper describes a new model of discontinuous dynamic recrystallization (DDRX) which can operate in constant or variable thermomechanical conditions. The model considers the elementary physical phenomena at the grain scale such as strain hardening, reco ...
Intergranular penetration of liquid 18 K gold into a superaustenitic stainless steel, which occurs during laser welding of these two materials, has been studied using a C-ring device which can be put under tensile stresses by a screw. It is shown that liqu ...
The structure and phase stability of binary tungsten-vanadium and tungsten-tantalum alloys are investigated over a broad range of alloy compositions using ab initio and cluster expansion methods. The alloys are characterized by the negative enthalpy of mix ...
The interactions between 60 degrees dislocation pile-ups with grain boundaries (GBs) are studied using multiscale modeling. Careful quantitative analyses of complex processes associated with 60 degrees dislocation absorption and transmission phenomena at S ...
Five ternary Sn-0.7Cu-xNi alloys with nickel contents in the range 0-1000 ppm have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites, eutectic and primary Cu6Sn5 is interpreted with phase ...
The densification and grain growth of bodies made from a commercial ultrafine alumina powder was investigated. The primary powder was initially subjected to dry (uniaxial cold pressing) and wet shaping (slip casting), followed by conventional (CS)-, two st ...
