Laboratory and in Situ Simulation Tests of the Fracturing in the EDZ around Galleries in Opalinus Clay
Related publications (33)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit sta ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
The design of reinforced and prestressed concrete girders is usually performed so as to avoid any non ductile failure mode. Amongst these failure modes, one of the most undesirable occurs by crushing of concrete in the web. To avoid this brittle type of fa ...
The celebrated Paxos protocol implements a reliable service as a state machine replicated over several machines. Replication provides reliability against permanent failures and availability against temporary crash failures. Whereas, in theory, Paxos can to ...
To study the deformation and fracture of sandstone under static-dynamic coupled load, a cylindrical specimen under pre-static axial and confining pressure was dynamically loaded using an improved split Hopkinson pressure bar (SHPB). Through the application ...
This paper proposes an analytical method to assess softerror rate (SER) in the early stages of a System-on-Chip (SoC) platform-based design methodology. The proposed method uses an executable UML model of the SoC for its input. Soft-errors on the design ar ...
Failure conditions in soils at elevated temperatures appear to be strongly dependent on the history of the application of stress and temperature. Four cases of such history leading to various modes of failure are identified and interpreted in terms of Ther ...
Shear in one-way reinforced concrete (RC) members is transferred in cracked concrete members by a number of actions such as aggregate interlock, residual tensile stresses, dowelling action, inclination of compression chord and transverse reinforcement (if ...
The potential failure evaluation of river embankment structures such as ripraps, resulting from erosion or over-flows during flood events, is the main issue of their stability and safety assessment. Moreover, a changed sediment transport in rivers as a pos ...
Adhesively bonded joints are being used increasingly in civil engineering structures, especially for joints comprising pultruded glass fiber reinforced polymer (GFRP) laminates. The layered material architecture, however, leads to a complex delamination fa ...