Laboratory and in Situ Simulation Tests of the Fracturing in the EDZ around Galleries in Opalinus Clay
Publications associées (33)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit sta ...
To study the deformation and fracture of sandstone under static-dynamic coupled load, a cylindrical specimen under pre-static axial and confining pressure was dynamically loaded using an improved split Hopkinson pressure bar (SHPB). Through the application ...
Shear in one-way reinforced concrete (RC) members is transferred in cracked concrete members by a number of actions such as aggregate interlock, residual tensile stresses, dowelling action, inclination of compression chord and transverse reinforcement (if ...
Failure conditions in soils at elevated temperatures appear to be strongly dependent on the history of the application of stress and temperature. Four cases of such history leading to various modes of failure are identified and interpreted in terms of Ther ...
The celebrated Paxos protocol implements a reliable service as a state machine replicated over several machines. Replication provides reliability against permanent failures and availability against temporary crash failures. Whereas, in theory, Paxos can to ...
The design of reinforced and prestressed concrete girders is usually performed so as to avoid any non ductile failure mode. Amongst these failure modes, one of the most undesirable occurs by crushing of concrete in the web. To avoid this brittle type of fa ...
This paper proposes an analytical method to assess softerror rate (SER) in the early stages of a System-on-Chip (SoC) platform-based design methodology. The proposed method uses an executable UML model of the SoC for its input. Soft-errors on the design ar ...
The potential failure evaluation of river embankment structures such as ripraps, resulting from erosion or over-flows during flood events, is the main issue of their stability and safety assessment. Moreover, a changed sediment transport in rivers as a pos ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
Adhesively bonded joints are being used increasingly in civil engineering structures, especially for joints comprising pultruded glass fiber reinforced polymer (GFRP) laminates. The layered material architecture, however, leads to a complex delamination fa ...