Effect of mechanical alloying atmosphere on the microstructure and Charpy impact properties of an ODS ferritic steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A phase-field model for the solid-solid alpha -> gamma transition of Ti-Al binary alloys is presented based on analytical Gibbs free energies and couplings to the thermodynamical database ThermoCalc. The equilibrium values recover the alpha + gamma phase b ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Mechanisms responsible for the embrittlement of leaded "free-machining" copper alloys at intermediate temperatures (i.e. around 400 °C) are examined using a combination of microstructural and mechanical characterization. Tensile tests are conducted on pure ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
Thick-film materials are very advantageous for piezoresistive pressure and force sensors because of ease of processing, reliability and low cost. However, their applications are restricted because standard thick-film materials require processing temperatur ...
Titanium alloys have been identified as candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elastic mo ...
Temper embrittlement of a 2.25Cr1Mo steel is evaluated by use of small punch testing with disc specimens. Clearly, a ductile-to-brittle transition temperature of the steel may be determined by this test, but the value obtained is much lower than that deter ...
The attachment of the first wall modules of the ITER FEAT fusion reactor is designed using flexible connectors made from titanium alloys. An assessment of the tensile and fatigue performance of two candidate alloys, a classical two phase Ti6Al4V alloy and ...
Plasma treatment of PET films was carried out under argon, followed by exposure to an oxygen atmosphere. The films underwent considerable changes in surface composition and morphology, as demonstrated by contact angle measurements, FTIR-ATR, AFM, and XPS. ...
