Publication
Cavity-backed slot array antenna in substrate-integrated waveguide technology
Related publications (60)
Biomaterial devices on Arecanut palm leaf for microwave applications
This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...
IEEE2023Q-Factor Bounds for Microstrip Patch Antennas
Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023Design Methodology for Wideband Bowtie Patch Antenna for 5G mmWave Applications
Anja Skrivervik, Abolfazl Azari
Millimeter wave (mmWave) frequencies has become a research area of interest in recent years because of providing broad available bandwidth and thus higher data rates. Wideband mmWave antenna is one of the important development areas in wireless communicati ...
IEEE2023Dual-Polarized SIW Slot Antenna Using ENZ Metamaterial for 5G and mmWave Applications
Romain Christophe Rémy Fleury, Amir Jafargholi
This paper presents a broadband dual-polarized substrate integrated waveguide (SIW) slot antenna. It is analytically shown that by decreasing the permittivity of a dielectricloaded slot antenna, the resulting bandwidth increases significantly, where the wi ...
IEEE2023Multi-antenna 3D pattern design for millimeter-wave vehicular communications
The transformation of the automotive industry towards ubiquitous connection of vehicles with all kind of external agents (V2X) motivates the use of a wide range of frequencies for several applications. Millimeter-wave (mmWave) connectivity represents a par ...
2022Enhancing the beamwidth of low profile single-fed microstrip antennas using parasitic elements
In this paper we present a technique to broaden the beamwidth of conventional patch microstrip antennas by using parasitic elements. This technique allows to keep the main advantages of microstrip antennas while increasing their beamwidth. We provide guide ...
IEEE2022A 28 GHz Beam Steerable Elliptic Microstrip Array Antenna for 5G Applications
This paper discusses the design, fabrication, and measurement of a two-layer, 2×10 elliptic, microstrip series fed antenna array operating at 28 GHz for 5G and mm-wave user equipment. A branch line coupler was used as a feeding network that can generate th ...
20224-Port Microstrip planar resonator for multiband microwave material characterization applications
Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...
IEEE2022Integration concept of an Electron Cyclotron System in DEMO
Minh Quang Tran, René Chavan, Hartmut Zohm, Konstantinos Avramidis
The pre-conceptual layout for an electron cyclotron system (ECS) in DEMO is described. The present DEMO ECS considers only equatorial ports for both plasma heating and neoclassical tearing mode (NTM) control. This differs from ITER, where four launchers in ...
ELSEVIER SCIENCE SA2021A 28 GHz 2 × 2 Antenna Array with 10 Beams Using Passive SPDT Switch Beamforming Network
In this paper, a dual-polarized four-port 2 × 2 series fed antenna array operating at 28 GHz with beam-switching capability is proposed. The antenna array uses a simple passive beamforming network to switch the main beam. The presented antenna design is su ...
2021