Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
Focused Electron Beam Induced Deposition (FEBID) is a rapid prototyping technique for the investigation, production and modification of 2 and 3-D nanostructures. The process takes place at room temperature, in the high-vacuum chamber of a Scanning Electron ...
To improve temperature durability for autoclaving of SiOx diffusion barrier coatings on polypropylene, plasma polymerized hexamethyldisiloxane (pp-HMDSO) is applied by plasma enhanced chemical vapour deposition as interlayer material and compared with resu ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
Indium was used as a catalyst for the synthesis of silicon nanowires in a plasma enhanced chemical vapor deposition reactor. In order to foster the catalytic activity of indium, the indium droplets had to be exposed to a hydrogen plasma prior to nanowire g ...
This study reports HIPIMS-sputtered samples of Cu-particulate films with currents at 6 and 60 amps leading to E. coil inactivation. The Cu coverage and nanoparticle structure of the fibers is reported by TEM. Evidence is presented of redox processes in the ...
The fragmentation behaviour of a thin brittle coating attached to a ductile substrate subjected to equibiaxial quasi-static in-plane tension is studied. The experimentally observed cracking patterns are related to repetitively branching coating cracks. The ...
Nowadays thin films play an important role in everyday life and in industries. Thin film technology has been developed primarily for the growing demand for development of smaller and smaller devices that require advanced materials and new processing techni ...
The main objectives of this work are 2-fold : The development of a novel type of composite material based on carbon nanofibers supported on sintered metal fibers filters (CNF/SMF) and to explore the use of this material as a catalytic support for a model r ...
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...