Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nowadays thin films play an important role in everyday life and in industries. Thin film technology has been developed primarily for the growing demand for development of smaller and smaller devices that require advanced materials and new processing techni ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
To improve temperature durability for autoclaving of SiOx diffusion barrier coatings on polypropylene, plasma polymerized hexamethyldisiloxane (pp-HMDSO) is applied by plasma enhanced chemical vapour deposition as interlayer material and compared with resu ...
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...
Focused Electron Beam Induced Deposition (FEBID) is a rapid prototyping technique for the investigation, production and modification of 2 and 3-D nanostructures. The process takes place at room temperature, in the high-vacuum chamber of a Scanning Electron ...
The main objectives of this work are 2-fold : The development of a novel type of composite material based on carbon nanofibers supported on sintered metal fibers filters (CNF/SMF) and to explore the use of this material as a catalytic support for a model r ...
This study reports HIPIMS-sputtered samples of Cu-particulate films with currents at 6 and 60 amps leading to E. coil inactivation. The Cu coverage and nanoparticle structure of the fibers is reported by TEM. Evidence is presented of redox processes in the ...
Indium was used as a catalyst for the synthesis of silicon nanowires in a plasma enhanced chemical vapor deposition reactor. In order to foster the catalytic activity of indium, the indium droplets had to be exposed to a hydrogen plasma prior to nanowire g ...
The fragmentation behaviour of a thin brittle coating attached to a ductile substrate subjected to equibiaxial quasi-static in-plane tension is studied. The experimentally observed cracking patterns are related to repetitively branching coating cracks. The ...