Analysis of onset of dislocation nucleation during nanoindentation and nanoscratching of InP
Related publications (36)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Metal plasticity is an inherently multiscale phenomenon due to the complex long-range field of atomistic dislocations that are the primary mechanism for plastic deformation in metals. Atomistic/Continuum (A/C) coupling methods are computationally efficient ...
In this report the plastic interaction of asperities sitting on a rough surface is investigated. The plastic interaction between asperities is particularly important for the sliding of two surfaces; it plays a key role in the wearing process. Recent studie ...
To reveal the operating mechanisms of plastic deformation in an FCC high-entropy alloy, the activation volumes in CrMnFeCoNi have been measured as a function of plastic strain and temperature between 77 K and 423 K using repeated load relaxation experiment ...
Dislocation multiplication in plasticity research is often connected to the picture of a Frank-Read source. Although it is known that this picture is not applicable after easy glide deformation, plasticity theories often assume Frank-Read-type models for d ...
Molecular dynamics simulations were performed to study the deformation mechanisms of < 110 >-oriented, faceted Cu and Au nanowires under bending along three different crystallographic directions. Independent of the bending direction, the stress field is ch ...
This study presents an improvement of an existing tribocorrosion model developed for passive CoCrMo alloys. This model is based on an empirical formalism established by Duncan Dowson in his pioneering works on the relation between wear and elasto-hydrodyna ...
Precursors of failure are dislocation mechanisms at the nanoscale and dislocation organization at the mesoscale responsible for long-range internal stresses and lattice rotation. Detailed information on the link between both scales is missing, computationa ...
Monocrystalline, cast aluminium microwires of diameter (D) below 25 mu m free of micromilling artefacts are annealed under protective atmosphere. Annealing increases the flow stress of all tested microwires, by an amount that is found, in a Haasen plot of ...
Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...
The microcasting process is a scaled-down investment casting process in which molten metal is pressure-infiltrated and directionally solidified in water-soluble moulds. It was previously developed to produce metallic microwires with a diameter (D) between ...