Configuration of control system for damage tolerance of a tensegrity bridge
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...
Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yieldin ...
In present day tokamaks, the role of the control research is to support the physics experiments and to prepare technologies for future devices such as ITER and DEMO. This paper presents the developments done under the MST1 program collaboration on ASDEX Up ...
The ability to control high-voltage actuator arrays relies, to date, on expensive microelectronic processes or on individual wiring of each actuator to a single off-chip high-voltage switch. Here we present an alternative approach that uses on-chip photoco ...
Adaptive structures modify their geometry and internal forces through sensing and mechanical actuation in order to maintain optimal performance under changing actions. Previous work has shown that well-conceived adaptive design strategies achieve substanti ...
The scope of this thesis encompasses two main subjects: fixed-structure data-driven control design on one side, and control design in power systems on the other. The overall goal is to identify challenging and relevant problems in power systems, to express ...
The construction industry is the largest consumer of raw materials and most of the environmental impacts of structures are embodied into load-bearing systems [1]. Civil structures are usually designed to meet strength and deformation requirements to withst ...
Introduction The construction industry has an extensive impact on the global environment and will be facing three big challenges in the next decades: reducing its resource consumption, decreasing its energy use, and limiting its waste production. This is e ...
Transferring solutions found by trajectory optimization to robotic hardware remains a challenging task. When the optimization fully exploits the provided model to perform dynamic tasks, the presence of unmodeled dynamics renders the motion infeasible on th ...
Adaptive joints are structural joints made of materials with enhanced transduction properties that can vary their stiffness via solid-state actuation (e.g. thermal, mechanical). In this work, stiffness tuning is used to switch the joint between a ‘locked’ ...
