Fracture of mass concreete under simulated seismic action
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The current study proposes a combined experimental and modeling approach to characterize the mechanical response of composite lead-free solders. The influence of the reinforcement volume fraction on the shear response of the solder material in the joint is ...
This paper presents the results of a comprehensive experimental study of the desiccation of fine-grained soils. Air-drying of initially saturated soil slabs in controlled conditions is investigated, by performing three kinds of tests: free desiccation test ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the initial fibre dosage and final fibre distribution and orientation in the cast element. According to the final fibre distribution an ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
We present an analytical micromechanical model designed to simulate the tensile stress-strain behaviour and failure of damaging composites containing a high volume fraction of reinforcing particles. One internal damage micromechanism is considered, namely ...
This paper presents a model to predict the shear resistance of the unreinforced lightweight concrete core of a recently developed hybrid sandwich concept for bridge decks. The sandwich skins consist of a fiber-reinforced polymer (FRP) composite sheet for t ...
This paper describes the microstructure, tensile properties and Charpy impact resistance of a reduced activation oxide dispersion strengthened ferritic steel Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) produced by mechanical alloying of a pre-alloyed, gas atomised steel ...
The purpose of this paper is to investigate experimentally the UHPFRC time-dependent behavior under sustained tensile loading and to determine the effect of the stress level on the creep response. Uniaxial tensile creep tests were performed at various stre ...
Japan Concrete Institute J(CI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
A statistical model for fracture of aligned-whisker-reinforced metals was used to interpret tensile data of a TiB-reinforced titanium alloy. From this analysis, a TiB whisker strength of 8.0 GPa with a Weibull modulus of 2 was predicted. The analysis is co ...
The scope of this paper is to present the global mechanisms of soil desiccation, including drying shrinkage and cracking. The paper first reviews the basic processes that are beneath the word “desiccation”. Then the results of an experimental study of desi ...