Stereoselectivity and electrostatics in charge-transfer Mn- and Cs-TCNQ(4) networks on Ag(100)

Nasiba Abdurakhmanova, Andrea Floris, Klaus Kern, Sebastian Stepanow, Tzu-Chun Tseng
Nature Publishing Group, 2012
Journal paper

Abstract

Controlling supramolecular self-assembly is a fundamental step towards molecular nanofabrication, which involves a formidable reverse engineering problem. It is known that a variety of structures are efficiently obtained by assembling appropriate organic molecules and transition metal atoms on well-defined substrates. Here we show that alkali atoms bring in new functionalities compared with transition metal atoms because of the interplay of local chemical bonding and long-range forces. Using atomic-resolution microscopy and theoretical modelling, we investigate the assembly of alkali (Cs) and transition metals (Mn) co-adsorbed with 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecules, forming chiral superstructures on Ag(100). Whereas Mn-TCNQ(4) domains are achiral, Cs-TCNQ(4) forms chiral islands. The specific behaviour is traced back to the different nature of the Cs- and Mn-TCNQ bonding, opening a novel route for the chiral design of supramolecular architectures. Moreover, alkali atoms provide a means to modify the adlayer electrostatic properties, which is important for the design of metal-organic interfaces.

Official source

https://infoscience.epfl.ch/record/184561?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Design of Surface-Supported Bio-inspired Networks for CO2 and O2 Activation at Room Temperature

Daniel Eduardo Hurtado Salinas

The structure of a biological system defines its function. Therefore, nature has developed sophisticated systems that catalyze chemical reactions that are vital for life on earth. For instance, the photosynthesis is a biological process that is partially regulated by the metallo-enzyme RuBisCO (Ribulose-1,5-bisphosphate carboxylase/oxygenase), whose function is to catalyze the capture and transfer of CO2 into organic molecules. This carboxylation reaction occurs at the active site, where a magnesium ion (Mg2+) is bound to organic molecules with carboxylate (COO-) and amine (NH2) functional groups. In the last decades, supramolecular chemistry has proven to be a valid approach to replicate the structural characteristics of these natural metal-organic systems. Metal atoms and organic molecules are used as building blocks to form two-dimensional (2D) metal-organic networks (MONs) on metal surfaces, through a self-assembly process that occurs spontaneously. In these systems the molecules bind to the metal centers and control their oxidation states that, as found in metallo-enzymes, is crucial to perform a catalytic task. Therefore, these supramolecular assemblies show promising features to be explored for heterogeneous catalysis. The main objective of this thesis is to reverse the structure-function equation, that is: instead of finding specific functions of well-known 2D structures for future applications, 2D structures are designed to reproduce the specific functions of well-known bio-systems. Thus, inspired in the structure of the active site of RuBisCO, 2D Mg-based supramolecular assemblies are rationally designed on Cu(100) or Mg(0001) surfaces at room temperature (RT) as a platform for CO2 adsorption. This work is the first study of self-assembly of alkaline earth metal atoms (Mg) with organic molecules ((1,4-benzenedicarboxylic acid (TPA) and 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT)) on metal surfaces. The first part of this thesis investigates the self-assembly of TAPT molecules. Scanning Tunneling Microscopy (STM) and High Resolution X-ray Photoemission Spectroscopy (HR-XPS) demonstrate that the molecules typically semi-deprotonate to form MONs with the adatoms from the host substrates. The exposure of these structures to CO2 results in the carboxylation of the amino groups. The second part proves that the COOH moieties of TPA molecules fully-deprotonate to form homo-molecular structures. The incorporation of Mg adatoms result in ionic MONs, which reproduce the carboxylate environment of the active site of RuBiSCO. STM, XPS and Density Functional Theory (DFT) analyze the structural changes, the chemical reactions and charge transfer during either the CO2 or O2 adsorption on the Mg2+ centers. The last part focusses on the co-deposition of both molecules to form 2D metallic-hetero-molecular networks with Mg2+ centers. The role of the Mg2+ centers as active sites for molecular adsorption and model systems for gas storage is studied. STM reveals that CO2 partially modifies the network towards a configuration that resembles the active site of RuBisCO. The formation of 3D structures to enhance CO2 adsorption is also evaluated.

EPFL2018

Electronic and magnetic interactions in single molecular and atomic contacts

Verena Katharina Schendel

This thesis encompasses an investigation of organic molecules on metallic substrates as well as a study of electronic and magnetic effects in atomic-sized palladium contacts. For this, a scanning tunneling microscope, operating at 6 K and ultra-high vacuum is used. The clean environment allows characterization of single molecules and atoms under well-defined conditions. Moreover, by examining at low-temperatures it is possible to study electronic and magnetic effects spectroscopically, which would otherwise be thermally obscured. The first part of this thesis focuses on studying organic molecules absorbed on metallic substrates. The molecules under investigation are thiophene derivatives of the archetypical organic semiconductor pentacene. The thiophene derivatives, tetracenothiophene (TCT) and anthradithiophene (ADT), contain either one or two thiophene groups at the terminal benzene rings. The dependence of the deposition temperature as well as the impact of different metallic substrates on their adsorption behavior is studied. When depositing the molecules on a Au substrate at room temperature, the molecules stay fully intact. In contrast, when deposited onto a Cu substrate, a breaking of the thiophene entity is observed. The breaking can be prevented by cooling the substrate to 200 K during deposition. Conductance measurements on the TCT molecules with an intact and broken thiophene entity reveal differences in their transport characteristics. The intact ones exhibit lower conductances than the broken ones. This can essentially be attributed to the fact that the latter ones bind covalently to the substrate, which facilitates transport. ADT deposited on Cu(111) can be reversibly and repeatedly interconverted between two distinct adsorption congurations associated with different conductances, and thus has been investigated as a molecular switch. The switching mechanism is related to a change between two different bonding configurations of the molecule to the substrate. The non-switched state ("off") can be ascribed to a strongly bound state and the switched state ("on") to a weaker bound configuration. The switching process is not only restricted to the location beneath the tip but also can be initiated within an extended area of about 100 nm in radius. This long-ranged addressing is enabled by means of surface state carriers of the Cu(111) surface. The non-local switching process is fully reversible, isomer selective and efficient over radial distances of about 100 nm. The second part of this work examines atomic-sized palladium (Pd) contacts. Pd exhibits outstanding properties owing to its high density of states (DOS) at the Fermi level. This renders Pd a "nearly ferromagnetic" material. Upon size confinement the DOS can be pushed to higher values and Pd can develop a net magnetization. Transport measurements were carried out for two distinct contact geometries; a tip-adatom and and a tip-surface contact geometry. Whereas for the tip-adatom contacts no magnetic state can be detected, measurements conducted for the tip-surface geometry might indicate the presence of a magnetic moment. The differences are attributed to the adsorption configuration of the single bridging atom in the junction. Spectra taken in point-contact with an adatom reveal a distinct inverted V-shaped feature. Presently we attribute this feature to paramagnons.

EPFL2015

Self-assembly of organic molecules represents an efficient and convenient bottom-up approach for the structural functionalization of surfaces at the nanometer scale. The great potential of assembling supramolecular architectures from organic molecules lies in the vast choice of building blocks that are accessible. This allows to predefine and to direct the molecular organization through the steric and electronic information stored in the molecules. A large variety of homotopic supramolecular structures can be achieved, however limited in complexity. The full realization of highly developed surface architectures for designable chemical functions and physical properties may depend critically on a higher level of complexity, which could be satisfied by utilizing a mixture of different molecular building blocks. Within this thesis, the self-organization of multi-component systems at well-defined metal surfaces is investigated by scanning tunneling microscopy. The mixtures consist of different representatives of linear polyaromatic ligands with carboxylate or pyridyl derived functional groups. The assembly is directed by hydrogen bonding, metal-organic complex formation or a combination of both, i.e. a hierarchical interaction scheme. The aim of this thesis is threefold: First, the homotopic self-assembly of different pyridyl ligands is investigated as a basis for the multi-component systems. One-dimensional chains as well as two dimensional (2D) networks can be formed by copper-pyridyl coordination motifs. The influence of the substrate on these structures will be discussed in detail. Moreover, the self-organization process of multi-components is investigated at the fundamental level. Since functional groups primarily discriminate the different molecular species during the assembly and with that assure a distinguished arrangement, selective bonding schemes are essential for the design of highly ordered supramolecular architectures. Two suitable selective coordination motifs are identified, an iron-carboxylate and a copper-pyridyl complex node. In ligand mixtures, strong preference of one metal species is observed at surfaces, which would not be expected in solution. In addition, redundant mixtures (i.e. ligands of different size but same functional group) serve as model systems to investigate the dynamic self-organization process of modular multicomponent systems, e.g. self-selection or error tolerance, directly with nanometer accuracy. Self-selection is observed if the molecular recognition is steered by a highly reversible coordination bond, while a more robust bonding fosters structural adaption and tolerance to the introduced error (i.e. redundant mixture). These experiments underline the importance of reversibility of the interactions steering the self-assembly process into highly ordered structures. Finally, the extended possibilities due to the multi-component approach for the construction of advanced architectures and structural control are explored: Complex and sophisticated supramolecular networks can be directly synthesized out of simple molecules at the surface. A hierarchical assembly is presented, where a coordination motif defines a primary unit, while hydrogen bonding steers the 2D organization. The secondary level of interaction (hydrogen bonding) can be exclusively addressed, leading to distinct 2D arrangement of the undisturbed primary coordination units. A concept of structural control by rational design is presented, where geometric network parameters can be modified by the replacement of the appropriate molecular species. Due the multi-component nature of the systems, a finer tuning of the structure is enabled (independent substitution of each component) compared to homotopic assemblies. Moreover, a continuation of the multi-component concept is demonstrated, where organizational control is imposed to a homotopic system by adding an additional molecular species. It is demonstrated that a long range order and thermal stability is imposed onto meta-stable Cu-pyridyl coordination chains by cooperative assembly with a carboxylate species.

EPFL2009