Comparison of lead zirconate titanate (PZT) thin films for MEMS energy harvester with interdigitated and parallel plate electrodes
Related publications (74)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Ferroelectrics are characterised by a spontaneous polarisation that can be reversed by an external electric field. The stability of the polarisation states and the possibility for controlled switching between the states render ferroelectric materials very ...
This paper describes fabrication and characterization results of piezoelectric micromachined ultrasonic transducers (pMUTs) based on 2-mu m-thick Pb(Zr0.53Ti0.47O3) (PZT) thin films. The applied structures are circular plates held at four bridges, thus par ...
Thin film piezoelectric materials offer a number of advantages in microelectromechanical systems (MEMS), due to the large motions that can be generated, often with low hysteresis, the high available energy densities, as well as high sensitivity sensors wit ...
The continuous downscaling of microelectronic circuits combined with increasing interest in ferroelectric thin films for non-volatile random access memories (FeRAM) is drawing great attention to small ferroelectric thin film structures. There are various c ...
A review is given on the current state of the art in piezoelectric micromachined ultrasonic transducers (pMUT). It is attempted to quantify the limits of pMUT's with respect to the electromechanical coupling, and to relate current achievements. Main needs ...
Piezoelectric micromachined ultrasonic transducers comprising a 10 mu m thick Si device layer and a 14 pro thick piezoelectric PZT layer were investigated. The PZT films were deposited by a sol-gel technique. The transverse piezoelectric coefficient was me ...
Novel, highly sensitive piezoelectric acoustic sensors based on partially unclamped Pb(Zr-x, Ti1-x)O-3 (PZT) coated cantilever and bridge have been fabricated by silicon micromachining. High sensitivity at low frequencies (5-100 Hz) has been achieved by pa ...
Three wet chemistry routes were used to synthesize Ba0.99Zr0.8Y0.2O3-delta (BZY20) and to avoid the drawbacks of the conventional mixed oxide route used for its preparation. Pure samples were prepared using the Matrix Trapping and Decomposition (MTD) and P ...
Lead-free, potassium sodium niobate piezoelectric ceramics substituted with lithium (K0.5-x/2,Na0.5-x/2,Li-x)NbO3 or lithium and tantalum (K0.5-x/2,Na0.5-x/2,Li-x)(Nb1-y,Ta-y)O-3 have been synthesized by traditional solid state sintering. The compositions ...
Lead oxide based ferroelectrics, represented by lead zirconate titanate (Pb(Zr,Ti)O-3) or PZT) are the most widely used materials for piezoelectric actuators, sensors and transducers due to their excellent piezoelectric properties. Considering lead toxicit ...