This paper focuses on the impact of an oscillating low-speed current on the structure and dynamics of the bottom-boundary layer (BBL) in a small stratified basin. A set of high-resolution current profile measurements in combination with temperature-microstructure measurements were collected during a complete cycle of the internal oscillation ('seiching') in the BBL of Lake Alpnach, Switzerland. It was found that even a relatively long seiching period of 24 hours significantly changed the form of the near-bottom current profiles as well as the dynamics of the turbulent dissipation rate compared to the steady-state law-of-the-wall. A logarithmic fit to the measured current profiles starting at a distance of 0.5 m above the sediment led to inconsistent estimates of both friction velocity and roughness length. Moreover, a phase lag between the current and the turbulent dissipation of 1.5 hours and a persistent maximum in the current profile at a height of 2.5 to 3 m above the sediment were observed. The experimental findings were compared to the results of a k-epsilon turbulence model and showed good agreement in general. Specifically, the inconsistent logarithmic fitting results and the observed phase lag were reproduced well by the model.
Gabriele Manoli, Sara Bonetti, Gabriel George Katul