Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
An experimental and theoretical investigation of the shear strength of reinforced concrete slabs without shear reinforcement is under way at the Ecole Polytechnique Fédérale de Lausanne. The first part of the program consists of 6 tests on two large scale ...
6th International PhD Symposium in Civil Engineering, IBK Publikation SP-0152006
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
Current models of the elasto-plastic behaviour of unsaturated soils contain important underlying assumptions that have not been tested due to a lack of adequate experimental data. To address this issue, the objective of this paper is to provide a comprehen ...
This paper reports on the composite action developed between pultruded FRP bridge deck systems and the supporting main girders for road bridges. Presented are requirements that an FRP deck must satisfy in order to function as part of the upper chord of the ...
Up until today reinforced concrete has been used in most cases for the manufacturing of bridge decks. Depending on the quality of the work carried out, defects can already occur after only a few years. These defects mostly appear in the form of corrosion o ...
This paper describes the quasi-static and fatigue performance of hybrid bridge girders composed of cellular FRP bridge decks and steel girders. The FRP bridge deck is connected adhesively to the steel girders and acts as the top chord of the hybrid section ...
It has been known for more than 150 years that action effects in bridges due to traffic action are higher than it has to be expected for purely static loads. In the design of road bridges, this difference is considered by multiplying static traffic loads w ...
The paper presents an analytical comparison of the amount of prestressing required for two similar bridges, one with internal and the other with external prestressing. This comparison shows that bridges with external prestressing can become economically co ...
So-called “non-load bearing” parts of (railway) bridges increase the stiffness and decrease the stresses in short span bridge structures. The rail track, consisting of ballast, sleepers and rails, has a non-linear behaviour and its rigidity depends on the ...
To improve the reduced available experimental data on the load capacity of full scale bridge deck slabs, 3 tests on a large scale bridge cantilever (10 x 4.2 m) were done. The cantilevers were tested under 4, 2 and 1 concentrated loads simulating traffic w ...
