Simulation of the welding process of steel tube joints made of S355 and S690
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In many applications elastoplastic composites are used in limited amounts, therefore it is important to have estimates of the size of their representative volume element both for modeling and experimental purposes. In this work the tensile response of part ...
Punching shear reinforcement is an efficient method to increase not only the strength but also the deformation capacity of flat slabs supported by columns. Especially, the increase in deformation capacity is desired so that the load can be distributed to o ...
The weld-induced residual stresses in a tubular planar K-shaped connection made of construction steel grades S355J2H and S690QH are evaluated using three-dimensional finite element models in thermo-mechanical simulation of welding process. Both lumped sing ...
Three-dimensional finite element simulations are used to investigate the role of serrated flow on the strain at the onset of necking in a cylindrical uniaxial tension specimen. The material is idealized using a modified form of the McCormick constitutive e ...
We report for the first time the results of tensile stress testing of thin film conductive structures patterned by stencil lithography on a PI substrate. The goal of this investigation is to determine the effects that mechanical deformation occurring in re ...
Under strong earthquake motions, the liquid stored within large unanchored steel tanks can cause rocking and uplift of the tank base from the supporting foundation. Repeated rocking can lead to low-cycle fatigue fractures in the tank base-plate, and ultima ...
Wood-to-wood bonds obtained by means of friction welding are a relatively new type of connections holding high potential to compete with existing structural adhesives, since a load bearing bond is formed almost instantaneously. This paper addresses the que ...
In this study, Al-5083 and St-12 alloy sheets were friction stir lap welded at different travel (7-23 cm min(-1)) and rotation (750-1125 rev min(-1)) speeds of the welding tool. The welded joints were characterised by various methods including shear tensil ...
In this work, we study the long-term mechanical strength under static load - i.e. static fatigue performance or resistance to subcritical crack growth - of ceramic thick-film circuits, namely how the static fatigue of the substrate is affected by the prese ...
The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...
