Structural variations of D-pi-A dyes influence on the photovoltaic performance of dye-sensitized solar cells

Two new organic D-pi-A dyes containing identical pi-conjugated spacer and anchoring/acceptor moieties but different donor groups were designed and synthesized. These dyes containing didodecylcyclopentadithiophene (CPDT) as a spacer, cyanoacrylic acid as an acceptor and N-butyl-carbazole or N-butyl-phenothiazine moieties as electron donor groups are labelled as V4 and V11 dyes, respectively. The variation in the donor group of these two dyes, that influences the photophysical, electrochemical and photovoltaic parameters, was investigated. The highest photovoltaic conversion efficiency of 7.5% was obtained with V4 dye at AM 1.5 G full sunlight intensity (100 mWcm(-2)). Comparison of phenothiazine donor dyes with two different pi-conjugated spacers, CPDT (V11) and vinyl thiophene (V7) containing devices shows that the V-oc of V7 dye is lower than that of V11 due to the downward shift of the conduction band edge. Transient photovoltage and electrochemical impedance spectroscopy measurements were performed to explain the differences in the PV parameters by varying the donors and/or spacer groups.

Influence of the counter electrode on the photovoltaic performance of dye-sensitized solar cells using a disulfide/thiolate redox electrolyte

Julian Burschka, Michael Graetzel, Mohammad Khaja Nazeeruddin, Shaik Mohammed Zakeeruddin

Strong scientific interests focus on the investigation of iodine-free redox couples for their application in dye-sensitized solar cells (DSCs). Recently, a disulfide/thiolate-based redox electrolyte has been proposed as a valuable alternative to the conventional I-3(-)/I- system due to its transparent and non-corrosive nature. In the work presented herein, we systematically studied the influence of different counter electrode materials on the photovoltaic performance of DSCs employing this promising organic redox electrolyte. Our investigations focused on understanding the importance of electrocatalytic activity and surface area of the electroactive material on the counter electrode, comparing the conventional platinum to cobalt sulfide (CoS) and poly(3,4-ethylenedioxythiophene) (PEDOT). Electrochemical Impedance Spectroscopy has been used to study in detail the interfacial charge transfer reaction at the counter electrode. By using a high surface area PEDOT-based counter electrode, we finally achieved an unprecedented power conversion efficiency of 7.9% under simulated AM1.5G solar irradiation (100 mW cm(-2)) which, to the best of our knowledge, represents the highest efficiency that has so far been reported for an organic redox couple.

2012

Investigation on Functionalized Ruthenium-Based Sensitizers to Enhance Performance and Robustness of Dye-Sensitized Solar Cells

Nuttapol Pootrakulchote

It has been increasingly aware to the world today that reserves of fossil fuels are limited and their use has serious environmental side effects. Encouraged by this realization was the evolution of the use of cleaner alternative energy, among which Dye-sensitized solar cells (DSCs) are potentially attractive candidates for the lower cost of producing devices which convert an abundant amount of energy from the sun into electricity. Dye-sensitizer in DSCs plays a crucial role as the chlorophyll in plants; to harvest solar light and transfer the energy via electron transfer to a suitable material (TiO2 in this case) to produce electricity. The topic of interest for this thesis is to further enhance the photovoltaic performance and the robustness of DSCs by tuning the optical properties of the dye-sensitizer (Ruthenium complex, in this case) using several strategies including an extension of the π-conjugation system, an introduction of antenna molecules and a modification of the Ru-complex structure. This work focuses on the DSC device fabrication and photovoltaic characterization in order to investigate more insight into structure-property-device performance relationship. New benchmarks for high performance DSCs with ruthenium complex sensitizers with π-extension in their ancillary ligands were presented. The overall conversion efficiency of 9.6% and 8.5% have been achieved with Ru-based sensitizer containing ethylenedioxythiophene, using low-volatile electrolyte and solvent-free electrolyte, respectively. The Rusensitizer functionalized with hexylthio-bithiophene unit exhibited a conversion efficiency of 9.4% with low-volatile electrolyte. All these devices showed good stability under prolonged light soaking at 60 °C. Extending π-conjugation of the anchoring ligand with thiophene units in monoleptic Ru-sensitizer also yields an impressive conversion efficiency of 6.1% using 3-µm-thin mesoporous TiO2 film in corporate with low-volatile electrolyte. DSC devices based on ruthenium sensitizers functionalized with thienothiophene- and EDOT-conjugated bridge, together with carbazole moiety on the ancillary ligands were found efficient with conversion efficiencies of 9.4% and 9.6%, respectively, in presence of a volatile electrolyte. The carbazole-functionalized ruthenium-based DCSs also performed excellently in the stability test using a low-volatile electrolyte. Furthermore, the Ru-complexes synthesized by click-chemistry in association with triazole-derivative moieties were successfully used as DCS sensitizers. DSC devices sensitized with these dyes provided the overall conversion efficiency close to 10% with volatile electrolyte. Further studies with solvent-free electrolyte showed notable device stability under extending full sunlight intensity at 60 °C. The results presented here provide a fertile base for further investigation, which will focus on improving the spectral response of ruthenium dye-sensitizer to full sunlight by searching for new strategies to modify the sensitizer with more efficient functional groups. The target is to reach higher conversion efficiency of DSC devices while retaining their stability under standard reporting conditions.

EPFL2012

Molecular gelation of ionic liquid-sulfolane mixtures, a solid electrolyte for high performance dye-sensitized solar cells

Jean-David Décoppet, Michael Graetzel, Thomas Moehl, Shaik Mohammed Zakeeruddin

Cyclohexanecarboxylic acid-[4-(3-tetradecylureido)phenyl]amide is an efficient gelator to solidify ionic liquid electrolytes. In this paper we apply this low molecular weight gelator to solidify the newly prepared sulfolane based ionic liquid electrolyte. This solid electrolyte is successfully applied as an electrolyte for dye sensitized solar cells. This solid electrolyte is thermo-reversible, upon heating it will become a liquid and at room temperature it will solidify, facilitating the cell filling by the electrolyte. Applying this solid electrolyte we obtained 7.8% power conversion efficiency under simulated AM 1.5 full sunlight intensity. The devices with liquid and solid electrolytes were analysed by electrochemical impedance spectroscopy to explain the differences in the photovoltaic performance. These cells were also measured under outdoor conditions at Jeddah, Saudi Arabia to explore the feasibility of practical applications of this electrolyte.

Royal Society of Chemistry2014

Investigation on Functionalized Ruthenium-Based Sensitizers to Enhance Performance and Robustness of Dye-Sensitized Solar Cells

Nuttapol Pootrakulchote

EPFL2012