Analysis of hardening limits of oxide dispersion strengthened steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Laser powder bed fusion (LPBF) was used to consolidate powders of a Ni-Cr-Fe-Mo alloy (Hastelloy X) blended with 1 wt% Y2O3 nanometric powders. The nearly-dense, crack-free specimens, with and without oxide dispersion strengthening (ODS), exhibit high-aspe ...
ELSEVIER2022
,
A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...
This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...
PERGAMON-ELSEVIER SCIENCE LTD2021
This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
Precipitation strengthening is one of the key strengthening strategies in many industrial alloys like aluminum alloys, nickel-based superalloys, etc. The yield strength of alloy is improved by forming precipitates in materials and employing them as obstacl ...
Samples from an ultrafine-grained Cu-4.5vol.%Al2O3 nanocomposite rod fabricated by powder compact extrusion were annealed at 400 and 700 degrees C for 15 min respectively, and their microstructure and mechanical properties were investigated. It shows that ...
Analytical scanning and transmission electron microscopy were used to study the microstructure of Ce,Er-doped Na0.5La0.5MoO4 laser crystals. Crystals were grown by the Czochralski method from the melts with a nominal composition of Na0.5La0.5−xCexEr0.005Mo ...
