Effect of warm pre-stressing on fracture toughness of Eurofer97 steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fracture experiments in a notched semi-circular bend configuration were conducted to characterize rate effects and failure micromechanisms of a marble using a servo-hydraulic machine and a modified split Hopkinson pressure bar. Three real-time measurement ...
Being good structural replacement for other conventional material, the pultruded glass fiber reinforced polymer (GFRP) profiles are being increasingly used in civil engineering structures. The connection between components is considered the most suspect ar ...
The Mode I and II fracture behaviors of adhesively-bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) laminates were experimentally investigated using Double-Cantilever-Beam (DCB) and End-Loaded-Split (ELS) specimens. The large speci ...
The embrittlement of metallic systems by hydrogen is a widespread phenomenon but the precise role of hydrogen in this process is not well understood and predictive mechanisms are not available. Here, a new model is proposed wherein hydrogen accumulation ar ...
Fracture tests have been performed on 333 flexure hinges of various shapes machined in monocrystalline silicon by Deep Reactive Ion Etching. The results show the significant effects of stress concentration, crystalline orientation and surface treatments on ...
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
Elastoplastic toughness testing of pure aluminium replicated foam is conducted following a J-procedure adapted from the ASTM E1820-08a standard using disc-shaped compact tension specimens. Tests cover a wide range of foam relative density V-m (10-24%). Res ...
Tantalum and hafnium carbides are classified as Ultra High Temperature Ceramics (UHTC) because of their extreme melting temperatures (above 3900 degrees C). Therefore, these materials can safely operate in the range of temperature that any other materials ...
Limited reliability of ferroelectric-based actuators restricts their use in high-performance applications, where stress-induced cracking of ferroelectric ceramics often leads to fatal failure. The main limiting factors are the relatively small fracture tou ...
Fracture toughness tests are conducted at room temperature and 923 K (650 degrees C) on SENB (Single Edge Notched Bend) specimens of three different (alpha(2) + gamma ) TiAl-based alloys. One alloy is a conventional near fully lamellar Ti-45Al-2Mn-2Nb + 0. ...
