Publication

Simulation of welding stresses for fatigue design of welded tubular connections

Related publications (44)

Experimental investigation of the cyclic properties of welds in mild structural steels

Structural steels have long been used in construction applications. Their mechanical properties and behavior under seismic loading or under fatigue design are of considerable interest for researchers and engineers. Although extensive studies have been cond ...

2021

Adaptive Laser Welding Control: A Reinforcement Learning Approach

Silvio Zanoli, Giulio Masinelli

Despite extensive research efforts in the field of laser welding, the imperfect repeatability of the weld quality still represents an open topic. Indeed, the inherent complexity of the underlying physical phenomena prevents the implementation of an effecti ...

2020

Recommendations for Improved Welding Procedures for Thick Steel Plates Through Thermo-Mechanical Analysis

Dimitrios Lignos

Welding of steel plates is accompanied by residual stresses that increase as the constraint provided by the welded components becomes greater. Consequently, crack initiation has been reported after welding thick plates due to the high residual stresses dev ...

2019

Influence of the optical measurement technique and evaluation approach on the determination of local weld geometry parameters for different weld types

Alain Nussbaumer, Martin Antonio René Garcia

The joining by welding processes of components is usually related to the creation of additional notches and geometrical peculiarities. Multiple investigations have shown that a clear correlation between the local weld geometry and the fatigue life of welde ...

2019

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Jean-Marie Drezet

Near interfacial residual stresses are investigated in a joint composed of aluminum alloy and dual phase steel. A small step neutron diffraction scan was initially performed to determine the weld interface position along the measured transverse cross secti ...

ELSEVIER SCIENCE SA2019

Strain-based approach to fatigue crack initiation on high-strength-steel welded joints under multiaxial loading

Alain Nussbaumer, Martin Antonio René Garcia, Heikki Tapani Remes

A recently novel strain-based approach recently proposed by Remes (Remes 2013) for the fatigue strength modelling of welded steel joints is extended here to consider multiaxial loading conditions and three dimensions finite element models. Only the first s ...

CRC Press (Taylor & Francis)2019

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Jean-Marie Drezet

Aluminum alloy AA6061 was welded to dual-phase steel 980 (DP980) by the friction melt bonding (FMB) process. Hot tears have been suppressed by controlling the thermomechanical cycle. In particular, the welding speed and the thermal conductivity of the back ...

2018

Fatigue Strength Upgrading of Cover Plate Ends by Welded Extensions in Existing Steel Bridge Girders

Alain Nussbaumer, Dimitrios Lignos, Vasileios Grigoriou

This paper investigates the fatigue upgrading of typical cover plate joint connections in existing steel bridge girders through cover plate extension. The upgraded detail is created by removing the existing transverse end weld, then welding the extension t ...

2018

Stress intensity factors for axial semi-elliptical surface cracks and embedded elliptical cracks at longitudinal butt welded joints of steel-lined pressure tunnels and shafts considering weld shape

Anton Schleiss, Pedro Filipe De Almeida Manso, Alexandre Jean Pachoud

When for steel liners of pressure tunnels and shafts high-strength steels are used, welded joints are subject to the risk of hydrogen induced cold-cracking in the base material. Longitudinal butt welded joints are critical regions as they are loaded transv ...

Elsevier2017

Shear loaded friction-welded crosswise arranged timber boards

Yves Weinand, Till Vallée, Benjamin Hahn

Friction welding of wood is a bonding technology that can be used for joining timber elements, and in which the adhesive is formed from thermally modified cell wall material within the substrate during the welding process. In this paper, this principle is ...

2017

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.