HS DIC-system application for strain and displacement measurements under static-dynamic coupling loading
Related publications (62)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Most of industrial hot deformation processes are performed in variable conditions where the strain rate and/or deformation temperature are not constant. In this work, hot compression tests in both constant and varying strain rate conditions were performed ...
Models for cardiac mechanics require an activation mechanism properly representing the stress-strain relations in the contracting myocardium. In this paper, we propose a new activation model that accounts for the transmural heterogeneities observed in myoc ...
In the last years, a novel typology of adhesive connections for structural glass application has emerged, known as laminated adhesive connections, which makes use of the transparent ionomer SentryGlasa (R) (SG) from Kuraray and the Transparent Structural S ...
In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...
Dynamic and post-dynamic recrystallization kinetics were investigated during hot-working of Inconel 718 as a function of temperature,strain and strain rate in the single phase domain.The post-dynamic evolution was found to be extremely fast and impacting s ...
Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...
Punching shear failures of structural concrete members have been the focus of attention of numerous works presented over the last decades. Although various rational approaches have been developed to predict these failures, there is still no unanimity on a ...
Mechanical stress combined with alloying as controlled by CO dissociation is investigated for the control of methanation activity. CO dissociation over strained Ni(211), Ni3Fe(211), and NiFe(112) is investigated. A continuous 0.62 eV range of CO reaction e ...
The creep and stress relaxation behavior of a Fe-17Mn-5Si-10Cr-4Ni-1(V,C) (wt%) shape memory alloy at low homologous temperatures (-45 degrees C < T < 50 degrees C) was systematically studied in stress and strain controlled tensile tests. At constant stres ...
We present a simple open-loop method to increase the response speed and suppress the viscoelastic creep of dielectric elastomer actuators. The parameters of the model can be extracted from two simple measurements: a strain vs. voltage ramp, and the strain ...