Interlayer exchange coupling in ordered Fe nanocluster arrays grown on Al2O3/Ni3Al(111)

We have combined magneto-optical Kerr effect, scanning tunneling microscopy, and x-ray magnetic circular dichroism to study the magnetic properties and the morphology of Fe nanoparticles grown on 2 ML thick Al2O3/Ni3Al(111)-(root 67 x root 67)R12.2 degrees with and without Pd seeding. The Ni3Al(111) substrate is ferromagnetic and shows two transition temperatures. The first, T-C1 = 81 +/- 3 K, is attributed to a 20-30 nm thick slightly Ni enriched region; the second, T-C2 = 240 +/- 12 K, is attributed to a much thinner and more strongly Ni enriched near interface region that contains Ni clusters embedded in the alloy matrix. The magnetic properties of the Fe cluster superlattice are strongly influenced by the superexchange coupling between Fe clusters and the underlying Ni clusters in that near interface region. Since the Ni clusters are at different distances from the oxide/metal interface, this coupling oscillates between ferro-and antiferromagnetic such that the overall magnetic moment is not increased by the Fe clusters. Pd seeding does not influence the magnetic properties of the system. The intrinsic Fe cluster properties, such as Curie temperature and easy magnetization axis, are accessed for T > T-C2. We find out-of-plane easy magnetization axes and T-C approximate to 300 K for cluster sizes above 440 atoms.

Propriétés magnétiques de nanostructures de cobalt adsorbées

Nicolas Weiss

This thesis reports results on magnetic properties of supported cobalt nanostructures. The nanostructures were grown on single crystal metal surface by Molecular Beam Epitaxy in an Ultra High Vacuum chamber. Our experimental setup is based on two in situ measurement techniques. The first is the Scanning Tunneling Microscope (STM) allowing to investigate the nanostructure morphology. The second, called Surface Magneto-Optical Kerr Effect (SMOKE), probes the magnetism of the nanostructures. By combining the data obtained with both techniques we were able to investigate the magnetism of 2D nanoparticles down to the atomic level. The first aim of the thesis consisted in disclosing the role played by the differently coordinated atoms in determining the Magnetic Energy Anisotropy in 2D nanostructures. To this purpose, we performed experiments on the Co/Pt(111) system, chosen as a model system since the Pt surface is well known to increase the out-of-plane uniaxial anisotropy as well as the magnetic moment of the Co islands. A preliminary work has been devoted to the growth of the Co islands as a function of the deposition and annealing temperatures. As a result, we learned to grow three different island's shapes : ramified, compact and double-layer islands. We then concentrated on the magnetism of these islands. Due to the nonlinear relationship between perimeter length and surface area, we were able to distinguish the different contributions to the anisotropy energy of surface and perimeter atoms. We found that the magnetic anisotropy in 2D Co nanostructures is predominantly due to the low-coordinated edge atoms, for which the anisotropy energy can be as large as 20 times the bulk value. This finding opens new possibilities to separately tune the anisotropy and moment of nanostructures. To exemplify this, and to illustrate once more the role of perimeter atoms, we produced Co island with a non-magnetic Pt core. As expected, these bimetallic islands have identical anisotropy and lower magnetic moment to their equally shaped pure Co counterpart. The second aim we focused on was the investigation of the magnetic properties of ultra-high density arrays of nanostructures created by self-assembly. We chose Co/Au(788) as a model system since the nanoscopic Co dots were found to have a very narrow size distribution and to be placed onto a lattice which is phase coherent on a macroscopic length scale. Moreover, the array has a density of 26 Tdot/in2 which allows the investigation of inter-particle interaction in ultra high density arrays. We showed that the narrow size distribution of the dots corresponds to an unprecedented narrow Magnetic Anisotropy Energy distribution with 35% width at half of the maximum. Moreover, we demonstrated the weak magnetic coupling between the Co dots despite their high density. In parallel to these fundamental researches, we developed a new experimental setup that will replace the current one. We designed a UHV chamber equipped with a homemade variable temperature STM combined with a SMOKE experiment. A quadrupole, focused on the sample, generates a 0.35 T magnetic field. This field is one order of magnitude larger than the present one and can be uniformly rotated in the plane of the quadrupole. Furthermore, the design of the new chamber allows STM imaging in this magnetic field. In this report, we present the adopted solutions as well as the first tests of the components (STM, SMOKE, cryostat).

EPFL2004

Growth, electronic structure and magnetism of supported metal nanowires

Pietro Gambardella

This thesis describes experiments with one-dimensional atomic chains grown by step decoration of vicinal Pt surfaces. The objective of the research was twofold: first, to characterize metal epitaxial growth on stepped substrates; second, to make use of this knowledge to fabricate arrays of monatomic metal wires in order to investigate their electronic and magnetic properties. The first part focuses on molecular beam epitaxy (MBE) of Ag, Cu, Co, and Ni on densely stepped Pt surfaces (one monatomic step every 20 Å). Growth was investigated on the atomic scale as a function of the substrate temperature and coverage by means of thermal energy atom scattering (TEAS) and scanning tunneling microscopy (STM). A wide variety of growth scenarios has been characterized depending on the choice of the overlayer material and on the interplay between surface diffusion, strain and alloying. Uniform arrays of one-dimensional atomic chains of Ag, Cu, and Co can be fabricated in a well defined temperature range. The growth of alternate wires of different metals was also investigated. In the second part we have studied the chemisorption of O2, CO, and H2, at Pt and at Ag-decorated Pt steps. We have identified the Pt edge atoms at the top of the step as the most active sites for O2 dissociation. Controlled decoration of the Pt steps by monatomic Ag wires was used to locally vary the reactivity of the Pt edge atoms and to further elucidate the dissociation process. Ag decoration results in a selective modification of the adsorption rate of O2, CO, and H2 on Pt stepped surfaces. The third part deals with the electronic and magnetic properties of Co monatomic wires grown on Pt(997). We have investigated the wire-induced valence band states by means of angle resolved photoemission (ARPES). Co 3d states attributed to monatomic chains display a double-peaked structure that suggests the presence of a one-dimensional exchange-split band. The magnetic behavior of the Co chains was studied by x-ray magnetic circular dichroism (XMCD). Co monatomic chains are superparamagnetic with blocking temperature between 5 and 10 K. The one-dimensional character of the wires shows up in a pronounced uniaxial magnetic anisotropy and in large values of the orbital magnetic moment compared to bulk Co and thin films.

EPFL2000

Construction d'un microscope à effet tunnel à basse température et études d'impuretés magnétiques en surfaces

Laurent Claude

This thesis reports on the design and construction of a novel experimental setup for the study of surface magnetic systems. This setup consists of a scanning tunneling microscope (STM) designed for ultra high vacuum (UHV) operating at T ≲ 1 K and strong magnetic fields (0 - 8.5 T). Such extreme experimental conditions have influenced the choice of the construction materials and components as well as the general design principles. This work comprises the design, realization and first tests of the STM, cryostat, damping system, sample preparation UHV chambers and transfer system. In parallel to this new setup realization, we have investigated the magnetic properties of dilute transition metal impurities deposited on non-magnetic metal surfaces. Measurements of those systems were performed with x-ray magnetic circular dichroism (XCMD). We have started by adressing the host electronic density effect on magnetic properties of the impurities. In order to make contact with the Friedel [1] and Anderson [2] models, 3d impurities (Fe and Ni) were deposited on alkali metal substrates (K, Na et Li) whose electronic structure is close to the Fermi electron gas. The gradual increase of the host electronic density with decreasing atomic weight going from K to Li allow us to study the effects of s - d electron hybridization on the magnitude magnetic moment of the impurity . In particular, we show that the magnetic moment of Fe is strongly reduced in going from K to Li, while the Ni moment disappears on Na and Li. The XMCD data also show that the orbital magnetic moment is atomic-like on K, but compared to the spin moment, significantly reduces as the substrate electron density increases. Finally, we report on a variable temperature STM study of the nucleation and growth processes of Pd/Pt(111). The experimental results are analyzed on the basis of mean field theory applied to surface diffusion processes and solved by numerical integration. This study allows us to highlight the different atomistic processes that contribute to the nucleation and growth of a prototype epitaxial system.

EPFL2005