Punching of flat slabs supported on rectangular columns
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In North America, a common design practice for steel frame buildings with perimeter steel special moment frames (SMFs) is to employ deep and slender wide-flange steel columns (i.e., range of column depth, d > 16 inches). Till recently, very little was know ...
The punching resistance of actual reinforced concrete flat slabs is potentially influenced by the compressive membrane action, which may significantly increase their resistance compared to isolated laboratory specimens. However, design codes have been deve ...
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec2014
With its smaller size, well-known boundary conditions, and the availability of detailed bathymetric data, Lake Geneva's subaquatic canyon in the Rhone Delta is an excellent analogue to understand sedimentary processes in deep-water submarine channels. A mu ...
In codes the drift capacity of unreinforced masonry (URM) walls is often estimated as a function of the failure mode and the aspect ratio. The empirical relationships are based on results from quasi-static cyclic tests on single URM walls, which were teste ...
The evaluation of the equilibrium of a system of forces that fulfils specified boundary conditions is a core question of theory of structures. This paper reviews three methods, related to procedures introduced at the end of the 19th century, to evaluate th ...
We study microfluidic self-digitization in Hele-Shaw cells using pancake droplets anchored to surface-tension traps. We show that above a critical flow rate, large anchored droplets break up to form two daughter droplets, one of which remains in the anchor ...
In this paper we propose a local orthogonal decomposition method (LOD) for elliptic partial differential equations with inhomogeneous Dirichlet and Neumann boundary conditions. For this purpose, we present new boundary correctors which preserve the common ...
In the present paper the experimental results of in-plane shear tests on masonry walls subject to cyclic loads under constant axial load and externally strengthened with composite grid embedded in a cementitious matrix are synthetized. The experimental res ...
In Switzerland many new residential buildings are constructed as unreinforced masonry (URM) structures or as mixed structures where URM walls are coupled with reinforced concrete (RC) walls by RC slabs. At present the boundary conditions of URM walls subje ...
We review recent progress in miniaturized dielectric elastomer actuators (DEAs), sensors, and energy harvesters. We focus primarily on configurations where the large strain, high compliance, stretchability, and high level of integration offered by dielectr ...
