EBSD coupled to SEM in situ annealing for assessing recrystallization and grain growth mechanisms in pure tantalum
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Oxide dispersion strengthened (ODS) steels are very promising materials for nuclear applications. In thispaper, the hot working behavior of ODS ferritic steels, consolidated by hot extrusion, is studied through torsion tests. Three ODS steels are produced ...
The interaction between recrystallization and concurrent precipitation is strongly dependent on the heating rate during annealing. In this study, the effects of heating rate on the grain structure, recrystallization texture and resulting mechanical propert ...
The mechanism for the growth of 3D ZnO nanowall networks in nest-like structure by a pulsed laser deposition (PLD) technique have been investigated for dye sensitized solar cells (DSSCs) and biosensor applications. As complex oxides shift towards large vol ...
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
Recent advances in large-scale synthesis of graphene and other 2D materials have underscored the importance of local defects such as dislocations and grain boundaries (GBs), and especially their tendency to alter the electronic properties of the material. ...
Heavily deformed 18-carat yellow gold samples show a recrystallization peak at 700 K during the first heating. The mechanical loss spectrum of polycrystals shows a relaxation peak at about 780 K, which is absent in single crystals made from the same alloy. ...
Under certain circumstances abnormal grain growth occurs in Nickel base superalloys during thermomechanical forming. Second phase particles are involved in the phenomenon, since they obviously do not hinder the motion of some boundaries, but the key parame ...
The densification and grain growth of bodies made from a commercial ultrafine alumina powder was investigated. The primary powder was initially subjected to dry (uniaxial cold pressing) and wet shaping (slip casting), followed by conventional (CS)-, two st ...
In this work, the effects of vanadium addition in the range of 0.3-3% (in weight percent) for an oxide dispersion strengthened reduced activation ferritic (ODS RAF) steel were investigated. Samples of the V-modified steel have been prepared using elemental ...
We investigate various microstructural features of nanocrystalline electrodeposited Ni-Fe with a nominal iron content of 50% and compare them with the well-known nanocrystalline Ni system. In-depth electron microscopy analysis reveals the existence of larg ...