TEM study of interfacial reactions and precipitation mechanisms in Al2O3 short fiber or high volume fraction SiC particle reinforced Al-4Cu-1Mg-0.5Ag squeeze-cast composites
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The effects of particle reinforcement of Sn-4.0wt.%Ag-0.5wt.%Cu (SAC405) lead-free solder on interfacial intermetallic layer growth and strength of the ensuing joints through short-term isothermal aging (150 degrees C) were studied. Composite solders were ...
In a recent contribution, we have reported that dendrites in the aluminum-zinc binary system can change their growth direction continuously from {100} to {110} as the concentration of zinc CZn increases from 5 to 90 wt pct.[1] This was interpreted as an in ...
Aluminum matrix composites reinforced with mixtures of diamond and SiC particles of equal size were produced by gas pressure assisted liquid metal infiltration. Replacing SiC gradually by diamond particles results in a steady increase of thermal conductivi ...
After reviewing the concept of vison excitations in Z(2) dimer liquids, we study the liquid-crystal transition of the quantum dimer model on the triangular lattice by means of a semiclassical spin-wave approximation to the dispersion of visons in the conte ...
Aluminum nitride (AlN) has been applied to various applications, including electronic substrates and packaging, semiconductor production components, wide band gap semiconductor, light-emitting diodes (LED) and acoustic wave devices; at the same time, it is ...
The mechanical response of the reinforced active alloy Incusil (TM) ABA (R)-SiC is studied. Specimens with up to 27 vol.% SiC particles are produced and tested in tension. The presence of the reinforcement leads to modifications in the alloy mechanical res ...
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
Alloys based on the Sn-0.7Cu-xNi system are potential Pb-free solders. In this paper we report on the solidification characteristics and microstructures of Sn-0.7Cu alloys containing 0-1,000 ppm nickel. The microstructural observations show that increasing ...
This thesis addresses the link between capillarity parameters, i.e. surface tension and contact angle, and the infiltration of porous preforms with molten metal by pressure infiltration The method used is to conduct pressure infiltration experiments of sel ...
We present dynamic measurement of drainage curves in two systems having relevance to metal matrix composite processing, namely SiC/Al and SiC/Al-12.2at%Si. Data show that liquid/solid chemical reactions that cause a lowering of the contact angle do indeed ...
