Heat recovery networks synthesis of large-scale industrial sites: Heat load distribution problem with virtual process subsystems

François Maréchal, Nasibeh Pouransari
Elsevier, 2015
Journal paper

Abstract

This paper presents a targeting strategy to design a heat recovery network for an industrial plant by dividing the system into subsystems while considering the heat transfer opportunities between them. The methodology is based on a sequential approach. The heat recovery opportunity between process units and the optimal flow rates of utilities are first identified using a Mixed Integer Linear Programming (MILP) model. The site is then divided into a number of subsystems where the overall interaction is resumed by a pair of virtual hot and cold stream per subsystem which is reconstructed by solving the heat cascade inside each subsystem. The Heat Load Distribution (HLD) problem is then solved between those packed subsystems in a sequential procedure where each time one of the subsystems is unpacked by switching from the virtual stream pair back into the original ones. The main advantages are to min- imize the number of connections between process subsystems, to alleviate the computational complexity of the HLD problem and to generate a feasible network which is compatible with the minimum energy consumption objective. The application of the proposed methodology is illustrated through a number of case studies, discussed and compared with the relevant results from the literature.

Official source

https://infoscience.epfl.ch/record/205411?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies

Céline Weber

In the present context of finding ways to decrease CO2 emissions linked with human activity, district energy systems including polygeneration energy conversion technologies are likely to play a major role. District energy systems meet the heating, hot water, cooling and electricity requirements of a district. Because they meet several types of energy requirements, and for more than one single building, district energy systems represent good opportunities to implement polygeneration energy conversion technologies. Polygeneration energy conversion technologies indeed provide different energy services simultaneously, helping to decrease the CO2 intensity compared to energy conversion technologies that meet only one energy service. Moreover, when providing energy to a whole district, polygeneration energy conversion technologies can take advantage of the various load profiles of the buildings by compensating the fluctuations and having therefore a smoother operation. A district energy system comprises essentially two parts: the plant with the polygeneration energy conversion technologies, and the distribution networks (heating and cooling). When designing the energy system for a district, one has therefore to define which type of polygeneration energy conversion technologies are best suited for the district, as well as which building are worse connecting to the system and which buildings shouldn't be connected (for instance if they are located too far away from the other buildings or if they have too small requirements to justify a connection from the plant). Moreover the operation strategy needs to be defined. In the present thesis, a method is developed that helps designing and optimizing district energy systems, from the structuring of the information available for the district (energy consumption profiles, location of the buildings, available energy sources, possible layouts for the pipes,...), over the thermo-economic modelling of the energy conversion technologies, the design of the network and the simulation of its operation strategy, and finally the evaluation of the results in terms of CO2 emissions and costs. The design and optimization of the district energy system is a multi-objective Mixed Integer Non Linear Programming problem. To solve this problem, a decomposition strategy including a master and a slave problem was developed. The master optimization problem takes care of the energy conversion technologies, whereas the slave optimization problem optimizes the network part. The two sub-problems are solved iteratively and result in the definition of a Pareto optimal curve that gives the trade-offs between the emissions and the costs for various configurations satisfying the requirements of the district. A configuration is characterized by given types and sizes of energy conversion technologies, their location in the district, the network layout, as well as the operation strategy of the technologies. Due to the time dependent energy consumption profiles and the geographical location of the buildings and plant, the method developed combines two well known types of problems, namely the multi-period optimization problems and the network problems. The method developed allows to take into account various constraints such as limited availability of energy sources, forbidden connections between buildings (for instance if a large river separates these two buildings), or else space limitations in underground technical channels. The capabilities of the method are demonstrated by means of a test case, as well as a real case in the Canton of Geneva. The results show the importance of considering all the energy services together (and not separately). Energy systems including a gas engine or a gas turbine combined cycle, together with heat pumps, indeed help decreasing both the emissions and the costs compared to the actual configurations. In the Geneva case study for instance, emissions can be decreased by up to 45%, with a simultaneous costs reduction of 24%. However, the method only deals with water networks, while in some cases space limitations and safety issues make the use of water impossible. A new type of district energy system based on CO2 as energy transfer medium (instead of water), is therefore developed in order to take such issues into account. This new system, that led to the submission of a patent, meets all the different types of energy requirements with only two pipes (instead of three or four like in conventional water based system), and uses the latent heat of CO2 as driving force, instead of the specific heat.

EPFL2008

Méthodologie de la synthèse des systèmes énergétiques industriels

Raffaele Bolliger

This work presents a synthesis method that leads to the preliminary design of industrial energy systems. Such systems are composed of several technologies that transform, through a set of physical unit operations, raw materials and energy into products and energy services. The purpose of the preliminary synthesis is to define which technologies form the system, to calculate their technical characteristics, their operating conditions and their interactions, based on performance indicators such as for example the cost of the system or its environmental impact. This area is studied since a long time and many synthesis approaches are available. However, these methods have significant limitations, particularly in their ability to face the study of more and more complex systems. The main goal of the method presented in this work is to enable the study of large systems and promote the use of the experience gained from previous studies in the form of models and methodological approaches. The synthesis method of industrial energy systems is based on the overall system optimization using a model that is obtained by assembling several modules, representing each a set of physical unit operations and whose equations are formulated with the black box technique, and an integration model that can represent the possible interactions within the system. Optimization is performed using a multi-objective evolutionary algorithm, whose objective functions are defined on the basis of calculation of several performance indicators based on the model of the system. To simplify the resolution of this complex system, the optimization problem is decomposed into a master problem, responsible for calculating the characteristics of the units and their operating conditions, and an optimization slave subproblem, which selects the units being part of the system and their interconnections. To ensure its robustness, the slave subproblem is formulated as a mixed-integer linear optimization problem. The slave subproblem is formulated by using process integration techniques, which are extended in this work to allow the synthesis of multiple heat and mass transfer networks. The synthesis problem can thus be defined using an explicit superstructure or by one generated automatically, either implicit or explicit. This work also introduces a technique that greatly reduces the number of degrees of freedom of the integration model. Instead of separately optimizing each ΔTmin/2 associated with heat streams, a formula is applied to calculate their value from a reference case. The ΔTmin/2 optimization is thus reduced to the optimization of a single decision variable related to the reference case, regardless of the size of the problem. The proposed method uses a set of heterogeneous elements, including flowsheeting software for modeling physical unit operations, mathematical programming tools for the formulation of the integration problem, methods for calculating performance indicators and calculation tools such as the optimization algorithm. This work introduces new tools developed to systematically apply the proposed methodology and to automate recurring operations of data transfer and the call of the various used software. In particular, a syntax description is defined as an abstraction layer to describe and to structure the exchanged information. A computing platform has been created to support the application of the method and to ensure the data transfer between its components. Two case studies are presented to illustrate the various aspects of the synthesis method. A first case, involving the synthesis of two combined cycles, has been chosen to illustrate the different application stages of the method and to show the potential reuse of certain modules. Through the integration techniques, it has been possible to identify potential heat recovery that can increase the performance of one of the cycles beyond what had been expected by experts using conventional simulation techniques. The second case study is about the treatment of waste generated by an industrial site active in the field of fine chemicals. Waste treatment can recover different materials and energy services useful for process units, thereby reducing the quantities purchased in the market. The model of multi-network integration can easily solve the complexity of the problem of waste management in developing strategies for allocating waste to the various treatments available for different objective functions related to operating costs and environmental impact.

EPFL2010

This thesis investigates a set of advanced topics inspired from the heat integration and the pinch technology, all tied around the challenge of identifying energy savings in large-scale chemical industrial plants. In search for a general-purpose methodology for energy efficiency, it has been observed that some well established methods exist already, but either they are case specific or relatively short handed when it comes to dealing with the large size plants. A general multi-step methodology is proposed in this thesis and then continuously improved, with a particular focus on the industrial realism and the usability for large-scale problems. The general methodology has been first put in practice to identify energy savings options in real case applications with the purpose of identifying the challenges to be tackled. Different aspects of large scale systems integration are being tackled: we start by studying issues experienced during the data gathering stage and come up with a multilevel data extraction approach. It is based on the different representation of the process unit heat transfer interfaces that satisfy the same heat requirement and let us tune the required level of detail with respect to how detailed the energy requirement definition needs to be for the site scale integration. The combination of those heat requirement levels is then applied to the Total Site Integration (TSI), alleviating the difficulties of the data extraction for large-scale problems. The heat recovery targets of the total site are then explored to identify further energy savings by the introduction of advanced technologies such as the heat pump and the Mechanical Vapor Recompression (MVR). Following the heat recovery improvement target, the study investigates the integration of one of the major heat consumers in the chemical processes : the distillation columns. The thermodynamic optimization of distillation columns has been examined together with the TSI and the integration of advanced separation concepts like Dividing-Wall Columns has been investigated considering a holistic site scale approach. The retrofit of the Heat Exchanger Network (HEN) of large-scale plants has been studied next. The definition of the same heat requirement presenting different heat transfer units has been used to introduce the existing network into the optimization model. The purpose is to evaluate and to minimize the required modifications to the existing system. We have proposed a multi-objective optimization with the evolutionary algorithm and a Mixed Integer Linear Programming (MILP) model. The optimal Pareto-frontier has been generated with respect to the minimum operating cost, the investment cost, the number of required modifications and the thermal exergy destruction. This approach offers two main advantages: (i) it is helpful to predict the region of good solutions without going through numerous iterations between targeting levels, usually required in the classical heat integration methodology for the evaluation of the retrofit of existing facilities and (ii) it helps considerably reduce the size of the posterior HEN re-design problem by minimizing the number of streams to be considered. The concluding chapters consider ways to reduce the size and the computational complexities of the HEN design for industrial size problems, with a main focus on the Heat Load Distribution (HLD) subproblem.

EPFL2015