Publication

The Role of Ca(BH4)(2) Polymorphs

2012
Journal paper
Abstract

This study compares the structure and decomposition behaviors of theα,β, and γ polymorphs of Ca(BH 4) 2 for hydrogen storage. Samples with different polymorphic contents are characterized using powder X-ray diffraction and vibrational spectroscopy. Decomposition paths and formation of decomposition products are monitored by differential scanning calorimetry and temperature programed desorption as well as in situ synchrotron radiation powder diffraction. Vibrational spectroscopy in the <1000 cm -1 range shows different sharp librational bands for α- andγ-, which are not seen inβ-Ca(BH 4) 2. In the 1000-2700 cm -1 range, all three polymorphs show the vibrational features of the C 2 local structure corresponding to the internal vibrations of BH4 -. Shifts of these vibrational bands toward larger wavenumbers are observed forγ andβ-Ca(BH 4) 2. The increase in wavenumber coincides with an increase of the decomposition temperatures that can be up to 15°C between α- andγ-Ca(BH 4) 2 depending on the polymorphic content. The decomposition temperature of pureβ-Ca(BH 4) 2 is found to be about 6°C lower than the decomposition of the high-temperature modification obtained via the polymorphic transformation of α-Ca(BH 4) 2. This confirms that the pure Ca(BH 4) 2 polymorphs have slightly different kinetic barriers and that the polymorphic content determines the decomposition kinetics of the samples. In addition, simultaneous thermogravimetric and differential scanning calorimetry analyses show increasing mass losses from approximately 7 to 10 mass% depending on the polymorph and the heating rate. The largest hydrogen release occurs for the purest α-Ca(BH 4) 2 at a heating rate of 10°C/min. Calculated activation energies lead to 184 (14), 192 (3) and 230 (1) kJ/mol forγ-, α- andβ-Ca(BH 4) 2 samples, respectively. This is in agreement with the observed decomposition behavior. The results illustrate the complexity of the decomposition of Ca(BH 4) 2 and how the polymorphic content and the formation of intermediates can affect or not affect the decomposition reaction pathways. In particular, the origins of CaB 2Hx and the borohydride borate Ca 3(BH 4) 3(BO 3) seem to be unrelated to the nature of the polymorph. © 2012 American Chemical Society.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (39)
Infrared spectroscopy
Infrared spectroscopy (IR spectroscopy or vibrational spectroscopy) is the measurement of the interaction of infrared radiation with matter by absorption, emission, or reflection. It is used to study and identify chemical substances or functional groups in solid, liquid, or gaseous forms. It can be used to characterize new materials or identify and verify known and unknown samples. The method or technique of infrared spectroscopy is conducted with an instrument called an infrared spectrometer (or spectrophotometer) which produces an infrared spectrum.
Molecular vibration
A molecular vibration is a periodic motion of the atoms of a molecule relative to each other, such that the center of mass of the molecule remains unchanged. The typical vibrational frequencies range from less than 1013 Hz to approximately 1014 Hz, corresponding to wavenumbers of approximately 300 to 3000 cm−1 and wavelengths of approximately 30 to 3 μm. For a diatomic molecule A−B, the vibrational frequency in s−1 is given by , where k is the force constant in dyne/cm or erg/cm2 and μ is the reduced mass given by .
Rotational–vibrational spectroscopy
Rotational–vibrational spectroscopy is a branch of molecular spectroscopy concerned with infrared and Raman spectra of molecules in the gas phase. Transitions involving changes in both vibrational and rotational states can be abbreviated as rovibrational (or ro-vibrational) transitions. When such transitions emit or absorb photons (electromagnetic radiation), the frequency is proportional to the difference in energy levels and can be detected by certain kinds of spectroscopy.
Show more
Related publications (117)

Using Complex Hydrides for Hydrogen Storage and Direct Borohydride Fuel Cells for Electricity Production

Youngdon Ko

Hydrogen storage and utilization are the technologies to achieve carbon-neutral energy systems with renewable energy sources. Among the various materials that have been investigated, complex hydrides are a material exhibiting high gravimetric hydrogen dens ...
EPFL2023

Melting pseudosymmetry and thermal expansion in 3-benzoylpropionic acid

Tomasz Poreba

The thermal behavior of 3-benzoylpropionic acid (BPA) was investigated using single-crystal and synchrotron powder X-diffraction, as well as differential scanning calorimetry analysis. The study revealed the existence of two subtly distinct structures of B ...
ROYAL SOC CHEMISTRY2023

Antenna-coupled infrared nanospectroscopy of intramolecular vibrational interaction

Hatice Altug, Aurélian Michel John-Herpin, Felipe Herrera

Many photonic and electronic molecular properties, as well as chemical and biochemical reactivities are controlled by fast intramolecular vibrational energy redistribution (IVR). This fundamental ultrafast process limits coherence time in applications from ...
Washington2023
Show more
Related MOOCs (23)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Synchrotrons and X-Ray Free Electron Lasers (part 1)
Synchrotrons and X-Ray Free Electron Lasers (part 1)
Synchrotrons and X-Ray Free Electron Lasers (part 2)
The first MOOC to provide an extensive introduction to synchrotron and XFEL facilities and associated techniques and applications.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.