The Design and Control of the Multi-Modal Locomotion Origami Robot, Tribot

Origami robots (Robogamis) use architecture to strategically activate different sets and sequence of actuators to achieve large variety of reconfigurable forms. Tribot is a unique mobile origami robot that can simultaneously choose between two modes of locomotion: jumping and crawling. When assembled, Tribot measures 64 x 34 x 20 mm^3, weighs 4 g, crawls at 17% of its body length per gait cycle and jumps seven times its height repeatedly without needing to be reset. To optimize the practicality of the nominally 2D design, we made two different approaches to build the prototypes. For one of them, we used the "traditional", monolithic, layer-by-layer robogami fabrication method and the second, we printed out most parts using a multi-material 3D printer. By showing the performance of two prototypes side-by-side, we show that with the 3D printer, we can minimize the number of functional layers and reduce the fabrication time. The embedded sensors allow Tribot's crawling gait pattern and jumping height to be modulated with a closed loop control. We compare the expected gait step size and displacement to that of the presented prototype while describing the design and control parameters to achieve the experimental results. We also illustrated the preliminary graphical design tool platform developed to optimize the next design iteration of Tribot.

Control of Bio-Inspired Sprawling Posture Quadruped Robots with an Actuated Spine

Tomislav Horvat

Sprawling posture robots are characterized by upper limb segments protruding horizontally from the body, resulting in lower body height and wider support on the ground. Combined with an actuated segmented spine and tail, such morphology resembles that of salamanders or crocodiles. Although bio-inspired salamander-like robots with simple rotational limbs have been created, not much research has been done on kinematically redundant bio-mimetic robots that can closely replicate kinematics of sprawling animal gaits. Being bio-mimetic could allow a robot to have some of the locomotion skills observed in those animals, expanding its potential applications in challenging scenarios. At the same time, the robot could be used to answer questions about the animal's locomotion. This thesis is focused on developing locomotion controllers for such robots. Due to their high number of degrees of freedom (DoF), the control is based on solving the limb and spine inverse kinematics to properly coordinate different body parts. It is demonstrated how active use of a spine improves the robot's walking and turning performance. Further performance improvement across a variety of gaits is achieved by using model predictive control (MPC) methods to dictate the motion of the robot's center of mass (CoM). The locomotion controller is reused on an another robot (OroBOT) with similar morphology, designed to mimic the kinematics of a fossil belonging to Orobates, an extinct early tetrapod. Being capable of generating different gaits and quantitatively measuring their characteristics, OroBOT was used to find the most probable way the animal moved. This is useful because understanding locomotion of extinct vertebrates helps to conceptualize major transitions in their evolution. To tackle field applications, e.g. in disaster response missions, a new generation of field-oriented sprawling posture robots was built. The robustness of their initial crocodile-inspired design was tested in the animal's natural habitat (Uganda, Africa) and subsequently enhanced with additional sensors, cameras and computer. The improvements to the software framework involved a smartphone user interface visualizing the robot's state and camera feed to improve the ease of use for the operator. Using force sensors, the locomotion controller is expanded with a set of reflex control modules. It is demonstrated how these modules improve the robot's performance on rough and unstructured terrain. The robot's design and its low profile allow it to traverse low passages. To also tackle narrow passages like pipes, an unconventional crawling gait is explored. While using it, the robot lies on the ground and pushes against the pipe walls to move the body. To achieve such a task, several new control and estimation modules were developed. By exploring these problems, this thesis illustrates fruitful interactions that can take place between robotics, biology and paleontology.

EPFL2018

Rich and Robust Bio-Inspired Locomotion Control for Humanoid Robots

Nicolas Benoît Dominique Van der Noot

Bipedal locomotion is a challenging task in the sense that it requires to maintain dynamic balance while steering the gait in potentially complex environments. Yet, humans usually manage to move without any apparent difficulty, even on rough terrains. This requires a complex control scheme which is far from being understood. In this thesis, we take inspiration from the impressive human walking capabilities to design neuromuscular controllers for humanoid robots. More precisely, we control the robot motors to reproduce the action of virtual muscles commanded by stimulations (i.e. neural signals), similarly to what is done during human locomotion. Because the human neural circuitry commanding these muscles is not completely known, we make hypotheses about this control scheme to simplify it and progressively refine the corresponding rules. This thesis thus aims at developing new walking algorithms for humanoid robots in order to obtain fast, human-like and energetically efficient gaits. In particular, gait robustness and richness are two key aspects of this work. In other words, the gaits developed in the thesis can be steered by an external operator, while being resistant to external perturbations. This is mainly tested during blind walking experiments on COMAN, a 95 cm tall humanoid robot. Yet, the proposed controllers can be adapted to other humanoid robots. In the beginning of this thesis, we adapt and port an existing reflex-based neuromuscular model to the real COMAN platform. When tested in a 2D simulation environment, this model was capable of reproducing stable human-like locomotion. By porting it to real hardware, we show that these neuromuscular controllers are viable solutions to develop new controllers for robotics locomotion. Starting from this reflex-based model, we progressively iterate and transform the stimulation rules to add new features. In particular, gait modulation is obtained with the inclusion of a central pattern generator (CPG), a neural circuit capable of producing rhythmic patterns of neural activity without receiving rhythmic inputs. Using this CPG, the 2D walker controllers are incremented to generate gaits across a range of forward speeds close to the normal human one. By using a similar control method, we also obtain 2D running gaits whose speed can be controlled by a human operator. The walking controllers are later extended to 3D scenarios (i.e. no motion constraint) with the capability to adapt both the forward speed and the heading direction (including steering curvature). In parallel, we also develop a method to automatically learn stimulation networks for a given task and we study how flexible feet affect the gait in terms of robustness and energy efficiency. In sum, we develop neuromuscular controllers generating human-like gaits with steering capabilities. These controllers recruit three main components: (i) virtual muscles generating torque references at the joint level, (ii) neural signals commanding these muscles with reflexes and CPG signals, and (iii) higher level commands controlling speed and heading. Interestingly, these developments target humanoid robots locomotion but can also be used to better understand human locomotion. In particular, the recruitment of a CPG during human locomotion is still a matter open to debate. This question can thus benefit from the experiments performed in this thesis.

EPFL2017

Pattern generators with sensory feedback for the control of quadruped locomotion

Auke Ijspeert, Ludovic Righetti

Central Pattern Generators (CPGs) are becoming a popular model for the control of locomotion of legged robots. Biological CPGs are neural networks responsible for the generation of rhythmic movements, especially locomotion. In robotics, a systematic way of designing such CPGs as artificial neural networks or systems of coupled oscillators with sensory feedback inclusion is still missing. In this contribution, we present a way of designing CPGs with coupled oscillators in which we can independently control the ascending and descending phases of the oscillations (i.e. the swing and stance phases of the limbs). Using insights from dynamical system theory, we construct generic networks of oscillators able to generate several gaits under simple parameter changes. Then we introduce a systematic way of adding sensory feedback from touch sensors in the CPG such that the controller is strongly coupled with the mechanical system it controls. Finally we control three different simulated robots (iCub, Aibo and Ghostdog) using the same controller to show the effectiveness of the approach. Our simulations prove the importance of independent control of swing and stance duration. The strong mutual coupling between the CPG and the robot allows for more robust locomotion, even under non precise parameters and non-flat environment