Monitoring Charge Carrier Dynamics at Atomic Length Scales by STM-induced Luminescence

The goal of this thesis is the combination of the high spatial resolution of scanning tunneling microscopy (STM) with the high temporal resolution of optical spectroscopy, by monitoring the light emitted from the tunnel junction. Two complementary techniques are presented, which allow (a) access to the local photon statistics and (b) following the luminescence response to nanosecond voltage pulses at atomic length scales. The versatility of these methods is demonstrated by using two different model systems: pure C60 films on Ag(111) and Au(111) substrates, as well as single fac-tris(2-phenylpyridine)iridium(III) (Ir(ppy)3) molecules adsorbed on them. These two systems reveal the possibility to investigate both the local charge carrier dynamics of mesoscopic systems as well as individually and selectively addressable quantum systems. Furthermore, these methods are not limited to pure emission processes such as the recombination of electron hole pairs; rather, it is also possible to study the dynamics of non-emitting processes via the excitation and radiation of surface plasmon polaritons (SPPs) from the tunnel junction. To achieve high time resolutions in the luminescence response of an investigated system, a further technique is developed that permits a quantitative mapping of the voltage at the tunnel junction with millivolt and nanosecond accuracy. Knowing the precise shape of the voltage pulses arriving at the tunnel junction offers compensation for ubiquitous pulse distortions arising from reflections and attenuations of the pulses on their way to the tunnel junction, thus enabling pulse rise and falling times of a few nanoseconds. Investigations of the electronic structure of pure C60 films show that the electronic states of C60 multilayers experience a band bending in STM due to the electric field between the STM tip and the metal substrate. As the band bending is sufficiently strong to align the lowest unoccupied molecular orbitals with the Fermi energy of the substrate, electrons can be injected by the substrate. At structural defects, these electrons can recombine with holes in the highest occupied molecular orbitals injected by the STM tip. At such defects, local deviations from the highly ordered structure of the C60 film result in localized electronic states within the band gap. These states act as traps for the injected electrons and holes and increase their lifetime such that they can recombine with each other. The underlying injection dynamics are accessible by the luminescence time response of these defects to nanosecond voltage pulses. Measurements of the second-order intensity correlation function prove that these defects act as single photon sources with exciton lifetimes of

Scanning Tunneling Luminescence of Pentacene Nanocrystals

Alexander Kabakchiev

Organic semiconductors are promising materials for future electronic and electroluminescence applications. A detailed understanding of organic layers and nano-sized crystals down to single molecules can address fundamental questions of contacting organic semiconductors at the nanometer limit and obtaining luminescence from them. In this thesis, electroluminescence spectra from pentacene, a policyclic hydrocarbon (acene), are discussed. The luminescence is induced by the current from the tip of a scanning tunneling microscope (STM). Pentacene is an organic semiconductor which gained a lot of attention in technology because of its electronic properties suitable for applications in thin film devices. Moreover, recent fundamental studies employed pentacene as a standard to demonstrate sub-molecular resolution by scanning probe techniques. This work reports the first observation of light emission from nanometer-sized pentacene crystals grown on an ultrathin insulating layer on noble metal surfaces. Different STM-techniques are combined to characterize the individual systems studied with respect to topography, crystal structure, electronic properties and work function changes. The initial step of the project was the implementation of an optical system for light collection from the tunnel-junction of a low-temperature STM. In the set-up, a novel approach based on the use of in situ adjustable lenses has been realized. Three lenses placed in the vicinity of the tip-apex allow light collection into three independent channels which can be used for versatile optical analysis. An important part in the characterization of the organic system was to clarify the interaction between adsorbed molecules and substrates. We investigated individual pentacene molecules on different ultrathin insulator-metal systems. With the STM tip in tunnel contact, the molecules are situated in a double barrier junction formed by the insulating layer on one side and the vacuum gap on the other side. The metal surface and the STM-tip form the electrodes. The electronic properties of pentacene in this configuration have been characterized. Insulator-metal-systems, which provide a good electronic decoupling for pentacene from the metal, have been chosen as substrates for the growth of pentacene nanocrystals. Using the sub-molecular resolution of the STM we resolved the structure of the top-layer of the pentacene nanocrystals and found that the crystal phase agrees with the pentacene bulk structure. Moreover, the comparison of charge injection barriers between individual molecules and nanocrystals of pentacene indicates a significant change of electronic properties after the formation of ordered structure from the individual building blocks. Optical spectroscopy of the emitted light reveals an excitonic emission from the nanocrystals, which is in very good agreement with photoemission spectra of macroscopic crystals. Although a highly localized current-injection by the STM tip is used for excitation, it can be concluded that the source of light emission is delocalized. In contrast to luminescence measurements reported for other organic materials in STM, the excitation is not localized on the individual molecule, into which a charge is injected by the STM-tip. Our study indicates the importance of inter-molecular coupling leading to a high mobility of the excited state which has to be considered in the framework of STM-induced luminescence. A further result is the observation of the Stark shift of pentacene luminescence, that has so far not been measured at large electric fields of the order of 1V/nm. The evaluation of the Stark shift provides information on dipole and polarizability change during the decay of an exciton. The measured large dipole change of the lowest singlet exciton in pentacene indicates a mixing of the Frenkel exciton (FE) with a small contribution of charge-transfer (CT). Finally, we developed a set-up for photon correlation measurements in the STM. The properties of photon statistics is a means which can unambiguously prove that the luminescence is due to a single-photon source, i.e. a light source which emits no more than one photon at a time. A typical example of such a source is the emission from a single molecule. We performed photon correlations measurements of the luminescence from pentacene and C60 nanocrystals. While the excitonic bulk emission of pentacene is not expected to represent a single photon emitter, we also did not observe anticorrelations in the case of C60 indicating the importance of the local environment in the STM-junction, e.g. the short distance to the metal electrodes.

EPFL2010

Bonding and Charge Transfer in Metal-Organic Coordination Networks on Au(111) with Strong Acceptor Molecules

Nan Jiang, Klaus Kern, Alexander Langner, Sebastian Stepanow

The geometric and electronic structure of two structurally similar metal organic networks grown on the Au(111) surface is investigated by scanning tunnelling microscopy (STM) and spectroscopy (STS) combined with density functional theory (DFT) calculations. The networks are composed of (i) F4TCNQ (C12F4N4, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquino-dimethane) molecules and Au adatoms segregated from the pristine metal surface, and (ii) TCNQ (C12H4N4, 7,7,8,8-tetracyanoquinodimethane) and codeposited Mn atoms. In both cases, the strong electron acceptor character of the molecules results in metal to-ligand charge transfer to the lowest unoccupied molecular orbital (LUMO). The amount of electrons donated from the 4-fold coordinated Mn atoms to TCNQ is higher compared to the 2-fold coordinated Au adatoms to F4TCNQ This behavior is reflected in the appearance of distinct spectral features in STS data in the energy region close to the Fermi level resulting from the intricate interplay between surface states, adatom states, and molecular orbitals. These observations are consistent with a picture in which the LUMO of the TCNQ acceptor molecule hybridizes with Mn and Au substrate metal states becoming practically filled, while the LUMO of F4TCNQ is only partially filled despite being the stronger electron acceptor. Our results reveal the importance of the type of bonding between the strong acceptor and the metal center (Au or Mn) as well as its coordination in the determination of the charge transfer to the adlayer, which is important for its electronic properties.

Amer Chemical Soc2012

Electric-Field-Driven Direct Desulfurization

Klaus Kern, Hagen Klauk, Ivan Pentegov, Verena Katharina Schendel, Uta Schlickum, Peter Wahl

The ability to elucidate the elementary steps of a chemical reaction at the atomic scale is important for the detailed understanding of the processes involved, which is key to uncover avenues for improved reaction paths. Here, we track the chemical pathway of an irreversible direct desulfurization reaction of tetracenothiophene adsorbed on the Cu(111) closed-packed surface at the submolecular level. Using the precise control of the tip position in a scanning tunneling microscope and the electric field applied across the tunnel junction, the two carbon-sulfur bonds of a thiophene unit are successively cleaved. Comparison of spatially mapped molecular states close to the Fermi level of the metallic substrate acquired at each reaction step with density functional theory calculations reveals the two elementary steps of this reaction mechanism. The first reaction step is activated by an electric field larger than 2 V nm(-1), practically in absence of tunneling electrons, opening the thiophene ring and leading to a transient intermediate. Subsequently, at the same threshold electric field and with simultaneous injection of electrons into the molecule, the exergonic detachment of the sulfur atom is triggered. Thus, a stable molecule with a bifurcated end is obtained, which is covalently bound to the metallic surface. The sulfur atom is expelled from the vicinity of the molecule.

Amer Chemical Soc2017

Scanning Tunneling Luminescence of Pentacene Nanocrystals

Alexander Kabakchiev

EPFL2010