Publication

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD-ZnO electrodes of various textures

Related publications (59)

Technology Mapping Using Multi-output Library Cells

Giovanni De Micheli, Alessandro Tempia Calvino

Technology mapping transforms a technology-independent representation into a technology-dependent one given a library of cells. Even if technology libraries contain multi-output cells, state-of-the-art techniques fully exploit single-output cells only. Mul ...

2023

Electrical Losses Mitigation in Silicon Heterojunction Solar Cells

Laurie-Lou Senaud

To overcome the worldwide challenges of climate change, photovoltaics is foreseen to play a significant role in the world electricity production. Nowadays, single junction crystalline silicon (c-Si) based solar cells hold the largest share of the global ph ...

EPFL2021

Transferability of the light-soaking benefits on silicon heterojunction cells to modules

Christophe Ballif, Jonas Geissbühler, Matthieu Despeisse, Mathieu Gérard Boccard, Jean Cattin

We investigate the effect of light soaking and forward electric bias treatment on SHJ solar cells and modules, and in particular the influence of the thermal treatment occurring during lamination. A substantial performance increase is observed after electr ...

2021

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts

Christophe Ballif, Franz-Josef Haug, Xavier Niquille, Andrea Ingenito, Sylvain Nicolay, Frank Meyer

In this contribution, we present an electron selective passivating contact metallised with a low temperature process to target front side applications in crystalline silicon (c-Si) solar cells. In addition to an interfacial silicon oxide (SiOx) and an in-s ...

2020

Characterisation of Silicon Heterojunction Solar Cells Beyond Standard Test Conditions

Jean Cattin

The global photovoltaic market is mostly dominated by solar cells based on crystalline silicon (c-Si), which are covering 95% of the market. This thesis concerns silicon heterojunction (SHJ), a high-efficiency technology with a 2% market share in 2018, but ...

EPFL2020

Development of Highly Efficient Perovskite-on-Silicon Tandem Solar Cells

Florent Sahli

Crystalline Silicon (c-Si) solar cells are dominating the photovoltaic (PV) market. Owing to their large manufacturing capacity, reliability and efficiency, c-Si solar cells are now cost-competitive with other non-renewable electricity sources in many plac ...

EPFL2020

A Simple, Robust, and Low-Cost Method To Produce the PURE Cell Free System

Sebastian Maerkl, Barbora Lavickova

We demonstrate a simple, robust, and low-cost method for producing the PURE cell-free transcription translation system. Our OnePot PURE system achieved a protein synthesis yield of 156 peg/mL at a cost of 0.09 USD/ktL, leading to a 14-fold improvement in c ...

AMER CHEMICAL SOC2019

Full-Area Passivating Contacts with High and Low Thermal Budgets: Solutions for High Efficiency c-Si Solar Cells

Gizem Nogay

Today more than 90% of the global PV market is covered by c-Si solar cells which are limited by recombination losses at the metal-semiconductor interface. This recombination path can be avoided by separating the metal from the c-Si wafer by introducing a b ...

EPFL2018

A passivating contact concept compatible with a short thermal treatment

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Matthieu Despeisse, Gizem Nogay, Philippe Wyss, Josua Andreas Stückelberger

In this study we present a boron-doped silicon carbide layers as a hole-selective contact which is compatible with short annealing time (typically < 1 minute) as the one used for firing of metal pastes. The application of such layers on symmetrically proce ...

IEEE2018

Comparison of LPCVD and sputter-etched ZnO layers applied as front electrodes in tandem thin-film silicon solar cells

Christophe Ballif, Franz-Josef Haug, Grégory Bugnon, Michael Elias Stückelberger, Etienne Antoine Julien Moulin

Aluminum-doped zinc oxide (ZnO:Al) layers deposited by sputtering and boron-doped zinc oxide (ZnO:B) layers deposited by low-pressure chemical vapor deposition (LPCVD) are well-established materials for front electrodes in thin-film silicon solar cells. In ...

Elsevier2016

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.