Ruthenium Dispersion: A Key Parameter for the Stability of Supported Ruthenium Catalysts during Catalytic Supercritical Water Gasification

The catalytic supercritical water gasification of isopropanol (450 degrees C, 30 MPa) over Ru catalysts supported on carbon and metal oxides was performed in a fixed-bed plug flow reactor. The Ru loading was between 1.2 and 2%. The catalyst stability over a period of 50h was in the order: Ru/C > Ru/ZrO2 > Ru/Al2O3. Ru/TiO2. Considerable coke deposits were found on Ru/Al2O3 and Ru/TiO2, which suggests that coke formation was responsible for the loss of activity, whereas the coke content was much lower on Ru/C and Ru/ZrO2, which confirms their better coking resistance. Clearly, Ru/C was the most stable catalyst as a loss of only 3% of its initial activity was measured. The high Ru dispersion of Ru/C and Ru/ZrO2 was beneficial for the improvement of the catalyst stability because of the higher gasification rate versus the coke formation rate.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Christian Ludwig, Frédéric Vogel, Gaël Peng
2016
Journal paper

Abstract

Official source

https://infoscience.epfl.ch/record/214460?ln=en

About this result

Related concepts (38)

Related publications (39)

Nanomaterial-based catalyst

Nanomaterial-based catalysts are usually heterogeneous catalysts broken up into metal nanoparticles in order to enhance the catalytic process. Metal nanoparticles have high surface area, which can increase catalytic activity. Nanoparticle catalysts can be easily separated and recycled. They are typically used under mild conditions to prevent decomposition of the nanoparticles. Functionalized metal nanoparticles are more stable toward solvents compared to non-functionalized metal nanoparticles.

Heterogeneous gold catalysis

Heterogeneous gold catalysis refers to the use of elemental gold as a heterogeneous catalyst. As in most heterogeneous catalysis, the metal is typically supported on metal oxide. Furthermore, as seen in other heterogeneous catalysts, activity increases with a decreasing diameter of supported gold clusters. Several industrially relevant processes are also observed such as H2 activation, Water-gas shift reaction, and hydrogenation. No gold-catalyzed reaction has been commercialized.

Asymmetric hydrogenation

Asymmetric hydrogenation is a chemical reaction that adds two atoms of hydrogen to a target (substrate) molecule with three-dimensional spatial selectivity. Critically, this selectivity does not come from the target molecule itself, but from other reagents or catalysts present in the reaction. This allows spatial information (what chemists refer to as chirality) to transfer from one molecule to the target, forming the product as a single enantiomer.

, , ,

Catalytic hydrogenations are important and widely applied processes for the reduction of organic compounds both in academic laboratories and in industry. To perform these reactions in sustainable and practical manner, the development and applicability of n ...

Washington2023

Supported ruthenium nanoparticles for supercritical water gasification - synthesis, activity and stability

Christopher Marc Hunston

Supercritical water gasification (SCWG) is a promising and versatile technology for the conversion of a variety of wet biomass streams into renewable natural gas. In this work, the focus was set on methane production with the help of an active and stable m ...

EPFL2021

Uncovering the Activity of Alkaline Earth Metal Hydrogenation Catalysis Through Molecular Volcano Plots

Shubhajit Das

Recent advances in alkaline earth (Ae) metal hydrogenation catalysis have broadened the spectrum of potential catalysts to include candidates from the main group, providing a sustainable alternative to the commonly used transition metals. Although Ae-amide ...

2021